Control System BCS 600For controlled braking ...• with pre-set braking distance• with pre-set deceleration• with pre-set braking timeWe command braking actionsBelt conveyors in mining industry RINGSPANIU® Industrial Application Brakes are used to stop declining conveyor belts in the mining industry. The brakes should prevent the belt from overshooting or rotating in the reverse direction. The load is not known at the time of braking and consequently the necessary braking torque is unknown. Brake system requirements The required braking force transferred onto the belt depends on • the pre-set braking distance, • the current load condition, • the current environmental conditions • and fluctuations in friction coefficient between pad and disc caused by temperature variations during braking.

Control System BCS 600Elevator car drive for underground mining Industrial Application The deceleration of elevator cars has to comply with certain regulations. Oscillations in longitudinal direction should be avoided. The load at the time of braking is unknown and could lead to peak loads in the ropes as well as rope slipping on the drum. The required braking force transferred onto the ropes depends on • load variations, • the current environmental conditions • and fluctuations by temperature variations during braking. • with pre-set deceleration Industrial Application On escalators and moving...

Short description The Control System BCS 600 is a brake control system for hydraulically released or hydraulically activated brakes, based on adjustable hydraulic pressure. Herewith, demanding braking actions (preset braking time, deceleration and braking distance) are performed reliably. At the same time the BCS 600 accomplishes important safety and monitoring functions. It consists of a control unit and a hydraulic power pack used in conjunction with brakes from the RINGSPANN product range. Control braking actions The standstill of the system will be reached independent of general conditions...

Touchpanel as graphical user interface Features • Fast reduction of the gap between disc and brake pad • Continuous monitoring of rotational speed, hydraulic pressure, oil temperature and rotational direction • Operation as a stand alone braking system is possible • Periodically light braking to clean the brake disc • Graphical visualization of the braking process in real time • Redundant installation of a second braking system is possible (one supports the other if necessary) • Retrofit or upgrade of outdated braking systems is possible • Permanent logging of operating data and system events...