*mydirectindustry

Catalogs
RINGSPANN
Datasheet BCS 050

Datasheet BCS 050

1 / 2 PagesView full catalog

Datasheet BCS 050

Product catalog summary

Specifications:

Minimum Brake Opening Pressure: 50 bar
Maximum System Pressure: 250 bar
Adjustable Starting Force: Time until maximum force is reached
Pressure Holding Time: Based on maximum force
Maximum Oil Volume: 270 cm³
Viscosity Range: 10 to 500 mm²/s
Weight: Approximately 5 kg

Description:

The 2-Stage Brake Control BCS 050 is designed for spring-activated, hydraulically released brakes. It facilitates quick bypassing of the air gap between the brake pad and disc, followed by a reduced braking force for a set period. Post-stopping, it ensures full braking force for load safety. The system is compact, retrofittable, and operates independently of the hydraulic power unit.

Working Conditions:

Ambient Temperature: -10 °C to +50 °C
Air Humidity: Less than 90%

Notes:

Fastening: 2 x M8 through hole for screw (L = 78 mm), 2 x M10 Floor screw connection (L = 15 mm)

Options:

Pressure monitoring memory via manometer
Mounting with brake on bracket (specific sizes only)

Technical Data:

Connection Hydraulic Power Unit: G 3/8”
Connection Brake: G 3/8”
Option: Manometer

Functional Principle:

The system includes a hydraulic circuit with components such as a check valve with orifice, pressure relief valve, throttle, pressure-controlled shut-off valve, and pressure accumulator. The braking force can be adjusted with throttle settings for up to 20 seconds.

Catalog excerpts

2-Stage Brake Control BCS 050for spring activated - hydraulically released brakes compact, integratable hydraulic extension Description The braking system„2-Stage Brake Control BCS 050" controls the effective braking force of spring-operated, hydraulically released brakes. It allows a fast bypassing of the air gap between the brake pad and the brake disc, followed by a braking process with a reduced braking force for an adjustable period of time. After the stopping process the system provides the full force of the brake for a safe holding of the load. The compact design makes the system fully retrofittable. It can be used independently of the hydraulic power unit in operation. Retrofitting is possible at any time. Even with existing braking systems, the braking process can be adjusted as required in order to avoid undesirable shock loads caused by the brake. Technical data Brake opening pressure 11 Time until the maximum force of the brake is reached 2) Based on the maximum force of the brake 3) Volume for opening all connected brakes Working conditions - 2 x M8 through hole for screw (L = 78 mm) - 2 x M10 Floor screw connection (L = 15 mm) Options • Pressure monitoring memory via manometer (switch-on point monitoring) • Mounting with brake on bracket (only possible with selected brake sizes)

Open the catalog to page 1

2-Stage Brake Control BCS 050 for spring activated - hydraulically released brakes compact, integratable hydraulic extension 186,5 Connection hydraulic power unit G 3/8“ Functional principle Hydraulic circuit diagram 1 Check valve with orifice Pressure relief valve Pressure controlled shut-off valve Pressure accumulator Throttle setting 1 Braking force Throttle setting 2 Braking force 5

Open the catalog to page 2

Datasheet BCS 050

Datasheet BCS 050

Catalog excerpts

All RINGSPANN catalogs and technical brochures

Archived catalogs