The Drive & Control Company Rexroth Bosch Group High Torque Vane Motors MV015, MV037, MV057, MV125

Unique vane crossing vane design provides maximum versatility This motor is created around the patented “vane crossing vane” design, a leading-edge concept in fluid power transmission, which allows for low speed/high torque and high speed/high torque. With over 50 displacements combined with a variety of optional features, this is one of the most versatile hydraulic motors in the world. Optimum power-to-weight ratio Four frame sizes with displacements ranging from 6 to 250+ cubic inch (98 to 4096+ cc) displacements (CID). Starting & stall torque Applications requiring maximum torque at zero rpm...

High Torque Vane Motors 3 The power difference – Vane crossing vane patented technology The vane crossing vane motor is a bi-rotational power converter utilizing working vanes in the rotating member (rotor) and sealing vanes in the stationary member (stator). With 10 rotor vanes working in four cavities, the motor provides an uninterrupted output torque regardless of angular position. This equates to 40 power strokes per revolution, delivering higher average torque with low torque ripple. The stator vanes function as seals between high- and low-pressure ports within the stator. This allows for...

E MV015 - 2000 rpm 509 Ib-ft (690 Nm) Offered in single, two-speed, double output shafts, wheelbearing style, and retractable shafts along with splined, tapered, or straight keyed shafts. Through-hole and thrust bearing options also available. SAE C mount. E MV057 - 500 rpm 3016 lb-ft (4089 Nm) Offered in A [3000 psi (207 bar)] or D version [4500 psi (310 bar)]. The same features offered in the 37 Series are available in a motor that’s one inch longer. Modified SAE D mount. E MV037 - 1000 rpm 2007 Ib-ft (2721 Nm) Offered in A [3000 psi (207 bar)] or D version [4500 psi (310 bar)]. Splined, tapered,...

High Torque Vane Motors E MV125 - 300 rpm 6903 Ib-ft (9359 Nm) Offered in A [3000 psi (207 bar)] or H version [4500 psi (310 bar)]. Splined, tapered, straight keyed, female, and double output shafts are standard, along with through holes to 3”. Optional thrust and radial load bearings with substantial capacity, tach pickups, double stacks, and brake mounts available. E Drill Motors Available in 37, 57 and 125 series as 2 or 4 port models. Numerous bearing/shaft configurations and through-hole options are available, including API box threads. Sublock system is standard. E MV125 4-Port -300 rpm...

* - Torque values are average performance data measured at maximum speeds with 102 SUS (21cSt) and standard rotating group. Note: 1. When considering double stack or 4-port motors, any 2 displacements in a given series can be combined. The resultant torque is the sum of the 2 displacements. This does not apply to the 15 series. 2. Higher speeds may be permissible under certain conditions. Consult factory.

High Torque Vane Motors * - Torque values are average performance data measured at maximum speeds with 102 SUS (21cSt) and standard rotating group. Note: 1. When considering double stack or 4-port motors, any 2 displacements in a given series can be combined. The resultant torque is the sum of the 2 displacements. This does not apply to the 15 series. 2. Higher speeds may be permissible under certain conditions. Consult factory.

► Augers ► Blast Hole Rigs ► Bow Thrusters ► Conveyors ► Coring/Drilling ► Directional Drills ► Fan Drives ► Feeder Mixers ► Injection Molding ► Planer Tables ► Power Tongs ► Pump Drives ► Roof Bolters ► Rotary Table Drives ► Shredders ► Timber Harvesting ► Top Head Drives ► Wheel & Tracks ► Winches

High Torque Vane Motors E Caisson drill rigs use 4-ported motors along with a multispeed circuit to vary bit rpm and torque. c Power tongs are a staple of the oil field. Our vane crossing vane motors have been providing the torque to make and break pipe joints for over 40 years.

E Vane crossing vane motors power top drives for oil and gas exploration. c A large capacity winch is driven by two 4096 cc (250 cubic inch) motors plugged into the drum via a gearbox.

High Torque Vane Motors 11 Engineering the right motors for over 40 years Rineer Hydraulics, Inc. was formed in 1967, and is recognized worldwide as a leading manufacturer of quality hydraulic motors. Rineer has been integrated with Bosch Rexroth since 2008 and is a strong complement to our hydraulic portfolio. Highly skilled engineers Customer satisfaction is our priority Our team of dedicated engineers, working with a state-of- Our company mission is to provide our customers with the-art CAD system, responds quickly to customer requests. a reliable, performance-proven product. Customers are...

The Drive & Control Company RexrothBosch Group Bosch Rexroth Corporation Hydraulics 8 Southchase Court Fountain Inn, SC 29644-9018 Telephone (864) 967-2777 Facsimile (864) 967-8900 www.boschrexroth-us.com Find your local contact person here: www.boschrexroth-us.com/contactus RA 10540/10.13 Replaces: RA 10540/10.12 © Bosch Rexroth Corporation 2013 Printed in the United States