Pipes Heating Band
1Pages

{{requestButtons}}

Catalog excerpts

Pipes Heating Band - 1

Fascie Tubazioni Pipes Heating Band RIMRTEK La Fascia Tubazioni riscaldante pud essere applicata su tubazioni di diametro variabile da 40mm a 100mm sia interne che esterne, escluse le zone a rischio esplosione. La fascia viene montata attorno al tubo, tenendola in tensione e fissandola nel l atolungoconvelcromaschio/femminapredisposto. COMPOSIZIONE: • Tessuto esterno in poliestere certificato WR-FR • Coibentazione in feltro ignifugo con lato in alluminio riflettente. • Parte elettrica in tessuto nylon con inseriti i resistori in Fibra di Carbonio in uno strato di maglia rame coperta in pvc. • Tessuto interno in aramidico siliconato • Cavo di alimentazione in neoprene 4m senza spina. The pipe heater wraps applied to pipes with a diameter range of 40 to 100 mm installed both indoors and outdoors, except in explosion hazardous environments. Heater wrap are stretched around the pipe and fastened by means of velcro straps (see picture). COMPOSITION: • External fabric in WR-FR certified poliester • Fireproof insulation felt with aluminum side reflective. • Nylon fabric Electrical part with incorporated Carbon Fibre resistors in a layer of copper mesh covered in PVC. • Internal fabric in siliconized aramid • Neoprene power cable 4m lenght without plug. DATI TECNICI: • Alimentazione: 230Vac. • Dimensione 1000x10 cm • Potenza: 310W. • Regolazione temperatura: da 13°C o da 40°C con termostato. • Grado di protezione: IPX4. • Certificazione: C€ TECHINCAL DATA: • Voltage: 230Vac. • Dimension 1000x10 cm • Power: 310W. • Temperature adjustment: 13°C or 40°C with thermostat. • International protection: IP X4 • Certification: C€ Codice Code Diametro tubo mm Pipe diameter mm

Open the catalog to page 1

All Rimatek catalogs and technical brochures

  1. Hot Box

    1 Pages

Archived catalogs

  1. Catalog ITA/EN

    24 Pages