Electronic Measurement Instruments Selection Guide
2Pages

{{requestButtons}}

Catalog excerpts

Electronic  Measurement  Instruments Selection Guide - 1

Function/Arbitrary Waveform GeneratorsFunction/Arbitrary Waveform Generator Configuration Table MSO/DS1000Z Series Digital Oscilloscope Function/Arbitrary Waveform Generator Models & Options DG1000Z Series Function/Arbitrary Waveform Generator Oscilloscope Series Models & Options DG1000 series DG1000Z series DG4000 series DG5000 series DG4000 Series Function/Arbitrary Waveform Generator Scope Considerations Bandwidth Sample Rate Record Length Digital Channels Serial Trigger & Decode Analysis Software Spectrum Analyzer Frequency Software Options. Hardware Options. Accessories *All “-TG”Models including Tracking generator with same frequency RF Signal Generator DSA800 Series Spectrum Analyzer DS6000 Series Digital Oscilloscope Oscilloscope Bandwidth determines the frequency range that the oscilloscope can accurately measure. A general rule of thumb is you want scope bandwidth to be 5 times the highest frequency you wish to measure. Sample Rate describes the frequency at which the instrument samples the data. Higher the sample rate provides better resolution and finer detail of the signal being captured. Record Length describes the number of points that can be captured and stored. Generally speaking larger record length provides for longer captures. The time duration is directly related to the sample rate with higher sample rates consuming more memory resulting in shorter time capture. Mixed Signal Oscilloscopes (MSO’s) allow users to not only look at the analog behavior of up to 4 channels but also trigger, capture, and analyze the behavior of up to 16 digital channels at the same time. Serial Triggering allows the user to trigger the oscilloscope based on a specific pattern or word found in a serial data stream. Serial decode allows the user to convert the waveform into a decoded readable format which allows for quick determination of problems on a serial bus. Analysis software allows the user to link their oscilloscope to an external PC and utilize the acquired data to complete application specific measurement tasks such as Ultra Power Analyzer software for engineers designing SMPS who need to make power quality, harmonics, and inrush current measurements.

Open the catalog to page 1
Electronic  Measurement  Instruments Selection Guide - 2

Data Acquisition /Switch System Main Frame UltraAquirePro Advanced Data logging Software Electronic Measurement Instruments RIGOL is transforming the Electronics, Life Science, and Chemical Test and Measurement Industry. Mainframe and modules are needed for a whole system Digital Multimeter Resolution DCV,DCI, ACV,ACI, 4 WR, 2 WR, C, Period, Frequency, Diode, CONT, Temperature, Sensor DCV,DCI, ACV,ACI, 4WR, 2WR, C, Period, Frequency, Diode, CONT, Temperature, Sensor Selection Guide USB host,USB Device,RS232, GPIB,LAN USB host, USB Device, RS232, GPIB, LAN Our premium line of products...

Open the catalog to page 2

All Rigol Technologies EU GmbH catalogs and technical brochures

  1. DG5000

    9 Pages

  2. DG2000

    12 Pages

  3. MSO5000-E

    28 Pages

  4. MSO5000

    28 Pages

  5. MSO/DS7000

    30 Pages

  6. MSO8000

    28 Pages

  7. DS8000-R

    23 Pages

  8. DS70000

    38 Pages