DS1000E/D Datasheet
7Pages

RIGOL Data Sheet DS1000E, DS1000D Series Digital Oscilloscopes DS1102E, DS1052E, DS1102D, DS1052D Product Overview DS1000E, DS1000D series are kinds of economical digital oscilloscope with high-performance. DS1000E series are designed with dual channels and 1 external trigger channel. DS1000D series are designed with dual channels and 1 external trigger channel as well as 16 channels logic analyzer. Electronic Circuit Test Circuit Functional Test Logical Relation Between Singals Verification Circuit of Mixed Signal Test Education & Training Dual analog channels and 16 channels logic analyzer, 100MHz maximum bandwidth, 1GSa/s maximum real-time sample rate and 25GSa/s maximum equivalent sample rate 5.6 inch 64k TFT LCD makes the waveform displays more clear and vivid Abundant trigger types: Edge, Pulse Width, Video, Slope, Alternate, Pattern and Duration Unique adjustable trigger sensitivity enables to meet different demands Enable to measure 22 types of wave parameters and track measurements via cursor automatically Unique waveform record and replay Built-in help menu enables information acquisition more convenient Multiple language menu and Chinese & English input Can store files in USB storage device or local the internal memory Analog waveform intensity can be adjusted To display a signal automatically by AUTO Pop-up menu makes it easy to read and use function Fine delayed scan function Built-in FFT function, hold practical digital filters Pass/Fail detection function enables to output testing results Multiple math operations for waveforms Powerful PC application software UltraScope Standard configuration interface: USB Device, USB Host , RS-232 and support USB storage device storage and PictBridge print standards The new function “Key Lock” can meet the needs of industrial production Support for remote

Automatically Measure 22 Waveform Parameters Cursor Measure DS1000E, DS1000D series oscilloscopes can measure 20 types of waveform parameters automatically, which contains 10 voltage and 12 time parameters. Automatic measure Multiple Trigger Pattern trigger In cursor mode, users can easily measure by moving cursor. 3 types of cursor measurement are optional: Manual, Track and Auto. Both DS1000E and DS1000D series contain abundant triggers:  Edge trigger, Pulse Width trigger, Video trigger, Slope trigger  Alternate trigger, Pattern trigger (DS1000D), Duration trigger (DS1000D) Especially...

All specifications apply to DS1000E, DS1000D Series Oscilloscopes unless otherwise noted. To come up to these specifications, two conditions must be met firstly: • The instrument must have been operated continuously for 30 minutes under the specified operating temperature. • Do perform Self-Calibration operation through the Utility menu if the range of operating temperature variations up to or more than 5°C. NOTE: All specifications are guaranteed unless where marked "typical".

A/D Converter Volts/div Range Maximum Input Offset Range Analog Bandwidth Single-shot Bandwidth Selectable Analog Bandwidth Limit (typical) Lower Frequency Response (AC, –3dB) Rise Time (typical at BNC, equivalent sample) DC Gain Accuracy DC Measurement Accuracy (Average Acquisition Mode) Delta Volts Measurement Accuracy (Average Acquisition Mode) Trigger Trigger Sensitivity Trigger Level Range Trigger Level Accuracy (typical) applicable for the signal of rising and falling time ≥20ns Trigger Offset 8-bit resolution, all channels sample simultaneously 2mV/div~10V/div (at the input terminal...

Video Trigger Video Standard Line Frequency Support for standard NTSC, PAL and SECAM broadcast systems. Line number range: 1~525 (NTSC) and 1~625 (PAL/SECAM)_ Slope Trigger Remarks: [1] Only one channel is available when the Sample rate is 1GSa/s. [2] For DS1000D Series.

General Specifications Calibration Interval_ The recommended calibration interval is one year

Ordering Information Thank you for choosing RIGOL products! RIGOL DS1000E, DS1000D series oscilloscopes RIGOL warrants that the product mainframe and product accessories will be free from defects in materials and workmanship within the warranty period. Probe×2 (1.5m), (1:1 or 10:1 adjustable) Passive Probes A Power Cord that fits the standard of destination country A Data Cable (DS1000D series) An Active Logic Head (DS1000D series) 20 Logic Testing Nips (DS1000D series) 20 Logic Testing leads (DS1000D series) A Quick Guide BNC Cable USB Data Cable RS232 Cable USB-GPIB Adapter DS1000E,...