DG2000
12Pages

{{requestButtons}}

Catalog excerpts

DG2000 - 1

Function/Arbitrary Waveform Generator Unique SiFi II (Signal Fidelity II) technology: generate the arbitrary waveforms point by point; recover the signal without distortion; sample rate accurate and adjustable; jitter of all the output waveforms (including Sine, Pulse, etc.) as low as 200 ps 16 Mpts memory depth per channel for arbitrary waveforms Standard dual-channel with the same performance, equivalent to two independent signal sources High frequency stability: ±1 ppm; low phase noise: -105 dBc/Hz Built-in high-order harmonic generator (at most 8-order harmonics) Built-in 7 digits/s, 240 MHz bandwidth full featured frequency counter Up to 160 built-in arbitrary waveforms, covering the common signals in engineering application, medical electronics, auto electronics, math processing, and other various fields Sample rate up to 250 MSa/s, vertical resolution 16 bits Arbitrary waveform sequence editing function available; arbitrary waveforms also can be generated through the PC software Various analog and digital modulation functions: AM, FM, PM, ASK, FSK, PSK, and PWM. Standard waveform combine function, capable of outputting specified waveforms combined with the basic waveforms Standard channel tracking function, when enabled, all the parameters of both channels are updated based on users' configurations Standard interface: USB Host&Device and LAN (LXI Core 2011 Device); USB-GPIB function supported 4.3'' TFT color touch screen RS232, PRBS, and Dual-tone outputs supported

Open the catalog to page 1
DG2000 - 2

Design Features Unique SiFi II Technology Generate the arbitrary waveforms points by points without distorting the signals. In comparison with the last generation of the SiFi technology, SiFi II has added multiple filters, supporting the dynamic adjustment of the edge time. Touch-enabled UI Design Provide brand new UI operation experience, supporting the tap and drag operation gestures. You can also use the onscreen keypad to complete the parameter settings. Advanced Function Output Support PRBS and RS232 pattern output and local Sequence editing. 100MHz Bandwidth White Gaussian Noise

Open the catalog to page 2
DG2000 - 3

DG2000 Series Function/Arbitrary Waveform Generator Dimensions: W×H×D = 261.5 mm × 112 mm × 318.4 mm Weight: 3.2 kg (Package Excluded)

Open the catalog to page 3
DG2000 - 4

Function Interface Dual-channel with the same performance Arbitrary waveform function with the unique SiFi II technology Burst function Various analog and digital modulation functions 160 built-in arbitrary waveforms

Open the catalog to page 4
DG2000 - 5

Sweep function Standard harmonic generator function Dual-tone function PRBS function Sequence function

Open the catalog to page 5
DG2000 - 6

Waveform combine function Channel and system setting File management function Standard 7 digits/s, 240 MHz bandwidth frequency counter

Open the catalog to page 6
DG2000 - 7

Specifications Unless otherwise specified, all the specifications can be guaranteed when the following two conditions are met. · The signal generator is within the calibration period. · The signal generator has been running ceaselessly for over 30 minutes under the specified operating temperature (23℃±5℃). All the specifications are guaranteed except the parameters marked with "Typical". DG2000 series specifications Model Max. Frequency Sample Rate Waveform Basic Waveforms Advanced Waveforms Built-in Arbitrary Waveforms Frequency Characteristics Sine Square Ramp Pulse Harmonic PRBS...

Open the catalog to page 7
DG2000 - 8

Pulse Pulse Duty Rising/Falling Edge Overshoot Jitter (rms) Arbitrary Waveform Sequence Waveform Length Vertical Resolution Sample Rate Min Rise/Fall Time Jitter (rms) Overshoot Harmonic Output Harmonic Order Harmonic Type Harmonic Amplitude Harmonic Phase 16 ns to 1000 ks (limited by the current frequency setting) 0.001% to 99.999% (limited by the current frequency setting) ≥8 ns (limited by the current frequency setting and pulse width setting) Typical (1 Vpp, 1 kHz) ≤5% Typical (1 Vpp) ≤5 MHz: 2 ppm of the period + 200 ps >5 MHz: 200 ps 16 Mpts 16 bits Interpolation filter: 10 Sa/s to 60...

Open the catalog to page 8
DG2000 - 9

Carrier Waveform Source Modulating Waveform Modulation Frequency PM Carrier Waveform Source Modulating Waveform Phase Deviation Modulation Frequency ASK Carrier Waveform Source Modulating Waveform Key Frequency FSK Carrier Waveform Source Modulating Waveform Key Frequency PSK Carrier Waveform Source Modulating Waveform Key Frequency PWM Carrier Waveform Source Modulating Waveform Width Deviation Modulation Frequency External Modulation Input Sine, Square, Ramp, Arb Internal/External Sine, Square, Ramp, Noise, Arb 2 mHz to 1 MHz Sine, Square, Ramp, Arb Internal/External Sine, Square, Ramp,...

Open the catalog to page 9
DG2000 - 10

Frequency Range 1 μHz to 240 MHz Period Measurement Measurement Range Voltage Range and Sensitivity (non-modulating signal) DC Offset Range DC Coupling 1 μHz to 100 MHz 100 MHz to 240 MHz 1 μHz to 100 MHz AC Coupling 100 MHz to 240 MHz Pulse Width and Duty Cycle Measurement Frequency and Amplitude 1 μHz to 25 MHz Ranges Min. Pulse Width Pulse Width Pulse Width Resolution Duty Measurement Range (display) Input Characteristics Input Signal Range Disruptive Discharge Voltage Coupling Mode Input Adjustment High Frequency Rejection 4 ns to 1,000 ks ±1.5 Vdc 50 mVRMS to ±2.5 (Vac+dc) 100 mVRMS to...

Open the catalog to page 10
DG2000 - 11

Overvoltage Protection Occurred when: The instrument amplitude setting is greater than 3.2 Vpp or the output AC+DC is greater than |1.6VDC| and the input voltage is greater than ±12 × (1 ± 5%)V (<10 kHz).Disruptive discharge voltage: ±18(Vac + dc). The instrument amplitude setting is smaller than or equal to 3.2 Vpp or the output AC+DC is smaller than |1.6VDC| and the input voltage is greater than ±2.6 × (1 ± 5%)V (<10 kHz).Disruptive discharge voltage: ±5(Vac + dc). Overcurrent Protection Occurred when: the current is greater than ±240 mA. Programming Time Configuration Changes Function...

Open the catalog to page 11
DG2000 - 12

Options and Accessories Description DG2052 (50 MHz, Dual-channel) Model DG2072 (70 MHz, Dual-channel) DG2102 (100 MHz, Dual-channel) 1 Power Cord conforming to the standard of the destination country 1 USB Cable Standard Accessories 1 BNC Cable 1 Quick Guide 1 Product Warranty Card Optional Accessories USB-GPIB Interface Converter NORTH AMERICA RIGOL TECHNOLOGIES, INC. No.8 Keling Road, New District,Suzhou, JiangSu,P.R.China Tel:+86-400620002 Email:info@rigol.com RIGOL TECHNOLOGIES EU GmbH Lindbergh str. 4 82178 Puchheim Germany Tel: 0049-89/89418950 Email: info-europe@rigol.com RIGOL...

Open the catalog to page 12

All Rigol Technologies EU GmbH catalogs and technical brochures

  1. DG5000

    9 Pages

  2. MSO5000-E

    28 Pages

  3. MSO5000

    28 Pages

  4. MSO/DS7000

    30 Pages

  5. MSO8000

    28 Pages

  6. DS8000-R

    23 Pages

  7. DS70000

    38 Pages