DG1000Z Series Datasheet
8Pages

Function/Arbitrary Waveform Generator SiFi (Signal Fidelity) for 100% waveform replication 2Mpts or 8Mpts/CH(std.), 16Mpts/CH (opt.) arbitrary waveform length Standard 2 full functional independent channels ±1ppm frequency stability, -125dBc/Hz phase noise, 200ps low jitter Built-in 8 orders harmonics generator Built-in 7 digits/s counter up to 200MHz 160 built-in pre-edited waveforms Intuitive arbitrary waveform editing software Full modulation supported: AM, FM, PM, ASK, FSK, PSK and PWM DG1000Z series function/arbitrary waveform generator is a multifunctional generator that combines many functions in one, including Function Generator, Arbitrary Waveform Generator, Noise Generator, Pulse Generator, Harmonics Generator, Analog/Digital Modulator and Counter. As a multi-functional, high performance and portable generator, it will be a new selection in education, R&D, production, test and etc.

DG1000Z Series Function/Arbitrary Waveform Generator Dimensions: Width×Height×Depth=261.5mm×112mm×318.4mm Weight: 3.2kg (without package)

Standard 2 full functional channels Arbitrary waveform function with innovative SiFi technology Standard harmonic generator Waveform summing function Standard 7 digits/s full function frequency counter with 200MHz bandwidth In line with LXI Core 2011 Device Channels and system setting

Specifications All the specifications can be guaranteed if the following two conditions are met unless where noted. · The generator is within the calibration period and has performed self-calibration. · The generator has been working continuously for at least 30 minutes under the specified temperature (18℃ ~ 28℃ ). All the specifications are guaranteed unless those marked with “typical”. Model Channel Sample Rate Waveform Basic Waveform Built-in Arbitrary Waveform Frequency Characteristics Sine Square Ramp Pulse Harmonic Noise (-3dB) Arbitrary Waveform Resolution Accuracy Sine, Square,...

Vertical Resolution Sample Rate Min Rise/Fall Time Jitter (rms) Editing Mode Harmonic Output Harmonic Order Harmonic Type Harmonic Amplitude Harmonic Phase Output Characteristics Amplitude (into 50 Ω) Range Accuracy Flatness Unit Resolution Offset (into 50 Ω) Range (Peak ac+dc) Accuracy Waveform Output Output Impedance Protection Modulation Characteristics Modulation Type AM Carrier Waveform Source Modulating Waveform Modulation Depth Modulating Frequency FM Carrier Waveform Source Modulating Waveform Modulating Frequency PM Carrier Waveform Source Modulating Waveform Phase Deviation...

Modulating Waveform Key Frequency PWM Carrier Waveform Source Modulating Waveform Width Deviation Modulating Frequency External Modulation Input Input Range Input Bandwidth Input Impedance Square with 50% duty cycle 2 mHz to 1 MHz Pulse Internal/External Sine, Square, Ramp, Noise, Arb 0% to 100% of the pulse width 2 mHz to 1 MHz 75 mVRMS to ±5 Vac + dc 50 kHz 10KΩ Burst Characteristics Carrier Waveform Carrier Frequency Burst Count Start/Stop Phase Internal Period Gated Source Trigger Source Trigger Delay Sine, Square, Ramp, Pulse, Noise, Arb (except DC) 2mHz to 25MHz 2mHz to 30MHz 1 to...

Trigger Characteristics Trigger Input

Certification Information in line with EN61326-1:2006 ±4.0kV (contact discharge) ±4.0kV (air discharge) 3 V/m (80 MHz to 1 GHz) 3 V/m (1.4 GHz to 2 GHz) 1 V/m (2.0 GHz to 2.7 GHz) 1 kV power lines 0.5kV (Phase to Neutral) 0.5kV (Phase to PE) 1 kV (Neutral to PE) 3V,0.15MHz-80MHz Voltage dip: 0 % UT during half cycle 0 % UT during 1 cycle 70 % UT during 25 cycles Short interruption: 0 % UT during 1 cycle Electrical Safety Electrical Safety in line with USA:UL 61010-1:2012, Canada: CAN/CSA-C22.2 No. 61010-1-2012 EN 61010-1:2010 Ordering Information Standard Accessories Resource CD (including...