MARSH FUNNEL VISICOMETER Instruction Manual Telephone: 86-579-87537698, 86-13819904200 Fax : 86-579-8753 696 Rev.B Website: http://www.rigchina.com, Email: [email protected] MSN:[email protected] Address: No.80-82,Qiude Rd, West Cheng Industrial Eastate, Yongkang city Zhejiang Province, China

RIGCHINA® 1. Summary Marsh funnel is an apparatus used to measure the viscosity of drilling fluids for daily. Adopting the API standard, determine the viscosity of drilling fluids with the time required for a given volume of drilling fluids pouring out from the funnel. The structure of the apparatus is simple. It is convenient for use and applied extensively in the departments dealing with petroleum and geological exploration. 2. Model and specification Item Mash funnel Attached with plastic sample cup Mash funnel Attached with plastic & stainless steel sample cup Mash funnel Attached with plastic...

RIGCHINA® 4. The structure and working principle of the apparatus (1) The diagram of sructure Fig.1 The Marsh funnel viscometer The components of the apparatus are listed in the following table. Item Trade name Funnel body Funnel handle Telephone: 86-579-87537698, 86-13819904200 Fax : 86-579-8753 696 Rev.B Website: http://www.rigchina.com, Email: [email protected] MSN:[email protected] Address: No.80-82,Qiude Rd, West Cheng Industrial Eastate, Yongkang city Zhejiang Province, China

RIGCHINA® 5. The operation and calibration of apparatus (1) The operation of apparatus 1) Block the flowing outlet of the funnel with finger, and then pour the drilling fluid sample into the clean and straight-upright funnel through screen until the surface of the fluid reaches the bottom of screen. 2) Put aside finger and at the same time start stopwatch, and then measure the time required for the drilling fluid flowing to the graduation mark of 946 ml (1qt.) in the sample cup. 3) Measure the temperature of the drilling fluid indicated by ℃ (or ℃) . 4) Record the Marsh funnel viscosity using...

RIGCHINA® JB/T9329-1999 standard. The product should be stored in the room with ventilation. The indoor air does not contain the impurity which can arouse device corrosion. 8. Fault judge and remove Item Removing method ①The internal size of flowing tube enlarge due to abrasion ①Replace the flowing tube Flow rate is greater than standard value ① Flowing tube Flow rate is less blocking。 than standard ② The outlet of flowing value tube is deformed ①Dredge and wash flowing tube ②Repair the outlet of flowing tube 9. A list for accessories, tools, major components and technical documents (1) Accessories...

RIGCHINA® (3)Technical documents Item Operation instruction Container load plan Telephone: 86-579-87537698, 86-13819904200 Fax : 86-579-8753 696 Rev.B Website: http://www.rigchina.com, Email: [email protected] MSN:[email protected] Address: No.80-82,Qiude Rd, West Cheng Industrial Eastate, Yongkang city Zhejiang Province, China