Core Saturator MODEL BH-3 …Quality Is Everything... ©2014 Rigchina Group Company All rights reserved. No part of this work covered by the copyright hereon may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical) without first receiving the written permission of Rigchina Group Company

Routine Rock Properties Core Saturator, Core Saturator, BH-3, is a manual controlled saturator for saturation of multiple plug samples or full diameter samples up to 12 inches in length. Short and long cycle vacuum cycles of 4 or 12 hours are available, dependent upon the samples average expected permeability with pneumatic metering valves allowing control of build up and bleed down rates. Samples can be pressured up to 2,000 psi (133 BAR) and maintained at this pressure independent of temperature fluctuations. Available accessories include plug sample trays, up to 3 of which can be accommodated...

Diameter of the test sample: Chamber diameter: Length of the test sample: Operating temperature: Wetted Material: Saturating fluid: Maximum Operating Pressure: Volume of one chamber: Total volume of sample for saturation in the one cell: 30 mm; 38,8mm; 100 mm; 110 mm 123 mm 10 inches or specified 5 - 30 °C SS-316 Stainless Steel Water, brine, oil or other fluid up to 7250 psi (50mPA) 8 liters up to 7 liters - up to 96 samples &30 mm, length 80 mm

Power supply specifications: Summarized peak demand: Other specifications can be done by customized request. Warranty and Returns Warranty Rigchina Group Company warrants its products to be free from defects in material and workmanship for a period of 24 months from the time of shipment. If repair or adjustment is necessary, and has not been the result of abuse or misuse within the twelve-month period, please return, freight prepaid, and correction of the defect will be made without charge. Out of warranty products will be repaired for a nominal charge. Please refer to the accompanying warranty...