HOT OBJECTS GEOMETRY CONTROL SYSTEM RF038 Series User's manual www.riftek.com [email protected]

Hot Objects Geometry Control System. RF038 Series

Hot Objects Geometry Control System. RF038 Series The system has been developed for use in industry and meets the requirements of the following Directives: · EU directive 2014/30/EU. Electromagnetic compatibility (EMC). · EU directive 2011/65/EU, “RoHS“ category 9. Laser safety The system makes use of an c.w. 450 nm wavelength semiconductor laser. The maximum output power is 30 mW. The system belongs to the 3R laser safety class according to IEC/EN 60825-1:2014. The following safety measures should be taken while operating the system: · Do not target the laser beam to humans. · Do not disassemble...

Hot Objects Geometry Control System. RF038 Series The measuring area of the scanner is shown in the figure below: The system operates as follows. The system is installed on a tripod in the horizontal plane of the object at such a distance that the object is located in the measuring area of the scanner ("Field of View" in Fig. 2).

Hot Objects Geometry Control System. RF038 Series The laser radiation of the scanner (in the form of a line) is projected onto the controlled object. The resulting image of the contour (section profile) of the object is analyzed by the controller that calculates either the diameter of the round object or the width of the rectangular object. To eliminate the measurement error caused by the non-perpendicularity of the laser line with respect to the axis of the object, measurements are made repeatedly when rocking the scanner around the horizontal axis using handles 7, 8. During the rocking process,...

Hot Objects Geometry Control System. RF038 Series Visual inspection · Check the equipment for completeness and absence of damage. · Check the rocking mechanism for smooth progress. · Check the condition of the windows of the laser scanner and, if necessary, cleanse them with a soft cloth. Charging the batteries The charging time is about 6 hours. Install the system in the control zone in accordance with Fig. 3. Press the controller power button on the battery. Press the scanner power button on the battery. After 5 seconds, a Wi-Fi connection should be established between the scanner and the controller....

Hot Objects Geometry Control System. RF038 Series The profile display area shows: the measurement result (Result:), the field of view of the laser scanner (gray lines), the object profile (red) and the circle (blue) for circular objects. The measurement result is displayed in tabular form in the results area. Columns: 1 - measurement number; 2 - result; 3 - time; 4 - machine number; 5 - object shape. The Clean table button is designed to clear the results table both on the screen and in the memory of the controller. To make measurements, follow these steps: · set the scanner performance parameter...

Hot Objects Geometry Control System. RF038 Series Warranty policy Warranty assurance for the Hot Objects Geometry Control System RF038 Series - 24 months from the date of putting in operation; warranty shelf-life - 12 months. Revision 1.0.0 Starting document. Applied Measurement Australia Pty Ltd Althen Sensors & Controls BV RAILWAY INSTRUMENTS ONLY Thornton Plaza, Unit 5, 27 Thornton Crescent, Mitcham VIC 3132, Australia Tel: +61 39874 5777 Fax: +61 39874 5888 [email protected] www.appliedmeasurement.com.au BOSNIA AND HERZEGOVINA ASCO RAIL sp. z o.o. EXCLUSIVE REPRESENTATIVE FOR...

Hot Objects Geometry Control System. RF038 Series Beijing Gemston Mechanical & Electrical Equipment Co., Ltd Xi'an Win-Success Automation Technology Co.,Ltd RAILWAY INSTRUMENTS ONLY Room 613, Anfu Mansion, Fengtai District, Beijing, China Tel: +86 10 6765 0516 Fax: +86 10 6765 6966 Mobile: +86 137 1755 1423 [email protected] www.baoft.cn Room 3-1-1039, Iduhui Building, No.11 Tangyan South Road High-Tech Zone, Xi’an Shaanxi PRC, China Tel: +86 29 81106280 Fax: +86 29 81106285 Mob: +86 133 19271405 [email protected] www.maxsensor.com CZECH REPUBLIC Rm 2205-2210, Zhongyou Hotel 1110 Nanshan Road, Nanshan...

Hot Objects Geometry Control System. RF038 Series Influx Big Data Solutions Pvt Ltd Paragon Instrumentation Engineers Pvt. Ltd. PT. DHAYA BASWARA SANIYASA No:2, Krishvi, Ground Floor, Old Airport Road, Domlur, Bangalore - 560071, India Tel: +91 73 37748490 Tel: +91 94 48492380 RAILWAY INSTRUMENTS ONLY 200, Station Road, Roorkee, 247 667, India Tel: +91 1332 272394 [email protected] www.paragoninstruments.com Botanic Junction Blok H-9 NO. 7 Mega Kebon Jeruk, Joglo Jakarta,11640, Indonesia Tel: +62 21 2932 5859 [email protected] Nisso Dekalo Import Export LTD [email protected]...

Hot Objects Geometry Control System. RF038 Series Campal Inovacoes Ferroviarias Lda. ul. Domaniewska 17/19, 02-672 Warsaw, Poland [email protected] www.riftek.com Lagoas Park, Edifício 7, 1° Piso Sul, 2740-244 Porto Salvo, Oeiras, Portugal Tel: +351 21 584 4348 [email protected] www.campal.pt EXCLUSIVE REPRESENTATIVE FOR RAILWAY EQUIPMENT ul. Wielowiejska 53, 44-120 Pyskowice, Poland Tel: +48 32 230 45 70 Fax: + 48 32 233 21 34 [email protected] [email protected] www.ascorail.pl SOUTH KOREA EXCLUSIVE REPRESENTATIVE FOR RAILWAY EQUIPMENT ul. Wielowiejska 53, 44-120 Pyskowice, Poland Tel: +48 32...

Hot Objects Geometry Control System. RF038 Series UNITED KINGDOM, IRELAND Althen Sensors & Controls 2531 Bradley St., Oceanside, CA, 92056, USA Tel: 858 633 3572 [email protected] Acuity Products of Schmitt Industries, Inc. Northamptonshire United Kingdom Tel: +44 0 7823 921427 [email protected] www.althensensors.com www.althencontrols.com 2765 NW Nicolai Street Portland, OR, 97210, USA Tel: +1 503 227 7908 Fax: +1 503 223 1258 [email protected] www.acuitylaser.com USA, CANADA, MEXICO International Electronic Machines Corporation RAILWAY INSTRUMENTS ONLY 850 River Street, Troy,...