Back-to-back Distance Measuring Gauge IMR Series Manual
1 / 14Pages

BACK-TO-BACK DISTANCE MEASURING GAUGE IMR Series User's manual www.riftek.com info@riftek.com

Back-to-Back Distance Measuring Gauge. IMR Series

Back-to-Back Distance Measuring Gauge. IMR Series Safety precautions and measurement conditions · The metering accuracy depends greatly on the wheel surface quality. · · · · Therefore it is necessary to carry out the check and presorting of the wheel surface flaws before measuring the diameter. Prior to place the gauge is a need to clean the wheels and rails parts that contact with gauge ball bearings and supports, of the mud. At arranging the gauge, do not allow hitting its supports on the wheel and rail It is necessary to inspect the gauge supports and laser sensors windows periodically...

Back-to-Back Distance Measuring Gauge. IMR Series Basic technical data Parameter Measurement range, mm Measurement error, mm Indication discreteness L±25 (L – nominal distance) ±0.1 0.1 mm, or 0.01 inch ** Weigh, kg Dimensions Power supply Example of item designation when ordering IMR-D Symbol D Nominal back-to-back distance, mm. Example: IMR-1590. Nominal back-to-back distance is equal to 1590 mm. Complete set to be supplied Name Quantity 1 piece 1 piece 1 piece 1 piece on request Measuring gauge IMR series Charger Manual Case Calibration tools (option) Electronic gauge contains ball...

Back-to-Back Distance Measuring Gauge. IMR Series Operation principle The method of measurement is based on direct measurement the distance by contactless laser sensor. Working with the gauge Press Red button to turn on the power. The display shows “ErrP” message if the accumulator battery voltage became lower than the control level. In this case the short-term work is possible after pressing any key. Single measurement To perform measurement, it is necessary to: · Turn the power on (press Red button). The display shows “- - - - -”. · Place the gauge on the rails between the wheels. · Make...

Back-to-Back Distance Measuring Gauge. IMR Series Shutdown occurs automatically. The display extinguishes if there were no buttons pressings for 60 seconds, at that only blinking dot is shown. If there were no button pressings for 4 more minutes, the gauge is turned off completely. You can turn the gauge off by long pressing Red button (more than 3 sec.). Indication parameters Image brightness To change the display brightness, it is necessary to: · Turn the power on (press Red button). · Press Blue button and keep it pressed for more than three seconds. · Display will show “brt X”. · Choose...

Back-to-Back Distance Measuring Gauge. IMR Series Calibration conditions Calibration of the device is not necessary in the current work. It is necessary only after producing, repairing and also after checking with negative result. To perform calibration, the following means are necessary: · Calibration tool RF260.90.000 (fig. 3). Get into the operation mode · To get into the operation mode, it is necessary to turn off the device (press · · · · Red button for more than 3 seconds). Keeping Green button in pushed position, turn on the device (press Red button). Display shows “CLbr.0” message...

Back-to-Back Distance Measuring Gauge. IMR Series · If readings of the sensor are sufficiently stable, press the Blue button. Sensor zero position is calculated in the device coordinate system, and prompt appears to save calibration results. Press the Green button or the Red button to confirm or cancel saving of the results, respectively. Charging of built-in accumulator battery To charge the accumulator battery, it is necessary to connect the charging device to the power grid 85-250V and to the battery compartment on the top panel of the gauge. The time of charging is 15 hours. Warranty...

Back-to-Back Distance Measuring Gauge. IMR Series Beijing Haiwei Lutong Technology Co., Ltd Chongqing Wolf Industrial Technology Co., Ltd Yard 1, Tianxing Street, Fangshan District, Beijing, China Tel: +86 10 8366 1866 Fax: +86 10 8366 1866 info@haiwlt.com www.haiwlt.com Room 2307 / 2308, Light of City international business building, No. 19 Jiangnan Avenue, Nan'an District, Chongqing, China Tel: 023 62832618 Fax: 023 62832113 info@wolf-hk.com www.wolf-hk.com Beijing Gemston Mechanical & Electrical Equipment Co., Ltd Xi'an Win-Success Automation Technology Co.,Ltd RAILWAY INSTRUMENTS ONLY...

Back-to-Back Distance Measuring Gauge. IMR Series ALTHEN GmbH Meß- und Sensortechnik OPTICAL MICROMETERS ONLY Sapelloh 172, 31606 Warmsen, Germany Tel: +49 5767 96020 Fax: +49 5767 93004 finger@finger-kg.de www.finger-kg.de EXCLUSIVE REPRESENTATIVE FOR RAILWAY EQUIPMENT ul. Wielowiejska 53, 44-120 Pyskowice, Poland Tel: +48 32 230 45 70 Fax: + 48 32 233 21 34 biuro@ascorail.pl export@ascorail.pl www.ascorail.pl Influx Big Data Solutions Pvt Ltd Paragon Instrumentation Engineers Pvt. Ltd. PT. DHAYA BASWARA SANIYASA No:2, Krishvi, Ground Floor, Old Airport Road, Domlur, Bangalore - 560071,...

Back-to-Back Distance Measuring Gauge. IMR Series PB 468, N-1327 Lysaker, Norway Tel: +47 23 891015 Fax: +47 92101005 mail@salitec.no www.salitec.no Las Codornices 104, Surquillo, Lima, Peru Tel/fax: +51 992436734 info@verne.cl www.verne.cl EXCLUSIVE REPRESENTATIVE FOR RAILWAY EQUIPMENT ul. Wielowiejska 53, 44-120 Pyskowice, Poland Tel: +48 32 230 45 70 Fax: + 48 32 233 21 34 biuro@ascorail.pl export@ascorail.pl www.ascorail.pl Campal Inovacoes Ferroviarias Lda. ul. Domaniewska 17/19, 02-672 Warsaw, Poland info@riftek.com www.riftek.com Lagoas Park, Edifício 7, 1° Piso Sul, 2740-244 Porto...

Back-to-Back Distance Measuring Gauge. IMR Series MAK Elektronik Malzeme Analiz ve Kalite Kontrol Cihazlari Dis Tic. Ltd. Sti. Cevizli Mh. M. Kemal Cd., Hukukçular Towers, A-Blok, No: 66-A/39 Kartal - Istanbul Tel: +90 216 970 1318 Tel: +90 850 840 2334 info@tekma.eu www.tekma.eu Frunze st. 22, 61002, Harkov, Ukraine Tel/Fax: +38 057 714 26 54 mail@koda.com.ua www.koda.com.ua UNITED KINGDOM, IRELAND Althen Sensors & Controls 2531 Bradley St., Oceanside, CA, 92056, USA Tel: 858 633 3572 r.ream@althensensors.com Acuity Products of Schmitt Industries, Inc. Northamptonshire United Kingdom Tel:...