Catalogs >
Riels Instruments >
RIV925 Flow control double glass with floating ball Riels® Instruments

RIV925 Flow control double glass with floating ball Riels® Instruments
1Pages

Catalog excerpts

RIV925 Flow control double glass with floating ball Riels® Instruments - 1

FLOW CONTROL DOUBLE GLASS WITH FLOATING BALL FLOW CONTROLS All data and contents of this sheet are the exclusive property of Riels Instruments RIV925 brass sight glass with two temperate glasses and Moplen floating ball Made for the control of movement of liquids, they are suitable for the passage of water; oils, gasoline, diesel and all other liquids. - Body made of brass or bronze. - Double tempered glass or borosilicate tempered glass calcium-sodium tempered crystal from -I0°C to I20°C. - Fasit® 205 seals and ball made of Moplen (Max I50°C). - Fasit® 400 seals and ball made of teflon (maximum I80°C). For a correct mounting the valve must be installed following the flow direction indicated by the arrow engraved on the body. Use to seal the threads of a material compatible with the fluid used. On order to mantain the watertight on the threads,a material compatible with the fluid must be used. Screw the valve on the threaded tubes by positioning the key exclusively on the special hexagonal parts up to the locking of the valve on the tube. After connecting the valve to the pipes, make sure the valve does not suffer stress due to piping, so use of heavy clamps to support the piping. Slowly open the upstream shutoff devices to prevent water hammer Calcium-sodium glass temperature

Open the catalog to page 1