Tutti i dati ed i contenuti di questa scheda sono di proprieta esclusiva di Riels Instruments STAINLESS STEEL ELECTROMAGNETIC LEVEL INCATOR THREADED WITH 1 OR 2 POINTS OF CONTROLFLOAT OF MAX. LEVEL TUBE FLOAT OF MIN. LEVEL USE: Made to ensure, with maximum safety the minimum or maximum level of liquids in tanks containing corrosive substanc Entirely in AISI 316 stainless steel, they are suitable for use in the chemical, pharmaceutical and food industri OPERATION: When the float of the incator meets the Reed switch incorporated in the tube at the pre-established stances, the contact is activated by the magnet housed in the float opens or closes, thus obtaining the possibility of senng a luminous or acoustic signal or sconnecting any electrical equipment connected to it. FITTING: The incator must be fitted in the vertical position, and the float must be at least 35mm from ferrous surfaces (walls, tanks, etc.). Seal is guaranteed by an oilproof synthetic rubber seal. MAX PRESSURE 10 Bar PROCESS A CONNECTION FLOAT OPE- ELECTRICAL CONNECTION RATING N° POINTS OF TEMP. CONTROL POLES POLES OCCUPIED SPST SPDT QUOTE AND NATURE OF CONTACTS TEMPERATURE SENSOR IN THE ELECTRICAL IN THE PRESENCE OF LIQUID LOWER PART OF LEVEL CONNECTION D ( THERMOSTAT ONLY FOR PROCESS 4 -CABLE OUTPUT IN SILICONE WITHOUT CABLE WITH PVC CABLE OR SILICONE MAX 4 POLE

TECHNICAL CHARACTERISTICS AND ORDERING CARD FLOATSFLOATS A B C D Tutti i dati ed i contenuti di questa scheda sono di proprieta esclusiva di Riels Instruments ELECTRICAL CONNECTIONS IP68S STAINLESS STEEL AISI3I6 HEAD THERMOSTAT ELECTRICAL CHARACTERISTICS LOAD VALUES COMMUTATING TEMPERATURE N.C. = NORMALY CLOSE N.A. = NORMALY OPEN