LEVEL CONTROLS IMMERSION LEVEL TRANSMITTER RIL160 Hydrostatic level transmitter. Suitable for dirty water, waste water The RIL160 level transmitteruses proven piezoresistive silicon measurement technology, in combination with Riels’ most advanced microprocessor signal conditioning circuitry, to deliver maximum accuracy and reliability over a wide compensated temperature range. It is perfectly suited for pump control applications that require transmitters with standard 2-wire (4÷20 mA current loop) or 3-wire (0÷10 V) output. The RS485 interface allows users to scale the analog output with respect to any required range, including within the standard range of pressure variation. In normal configuration, the RIL160 is held in suspension inside the liquid by a standard cable with PUR sheath (PE, PTFE required), which is selfsupporting and is equipped with vent holes. Upon request, Riels’ enhanced lightning protection makes this transmitter ideal for installations in areas prone to chronic damage due to lightninginduced voltage transients.. Tutti i dati ed i contenuti di questa scheda sono di proprietà esclusiva di Riels Instruments • Non-fouling diaphragm design • Housing resist chemical attack (AISI 316SS) • Digital interface RS485 • Rangeable analog output • Increased reliability in lightning-prone regions Performance Specifications • Level measurement in wells • Level measurement in tanks • Level measurement of leachate plant biomass • Level measurement in lakes and ponds • Measurement and control level artificial lakes • Level measurement of fuel tanks • Check operation of pumps • Level measurement of dark waters • Level measurement fish tanks • Check alert level manholes General Pressure Range Environmental Operating Temp.Range Compensated Temp.Range Electrical @25°C(77°F) Output Signal Power Supply Load Resistance Insulation Resistance Physical Specifications Housing 304 stainless steel, option 316SS 316L stainless steel, option ceramic Performance Accuracy** Temp. Coeff– Zero*** Temp. Coeff– Span*** Long-Term Stability * All values measured at 25°C(77°F)** Including non-linearity, hysteresis and repeatability. ***0°C to 70°C(32°F to 158°F) with reference to 25°C (77°F).The listed specifications and dimensions are subject to change without prior notice Riels

Type A (See the dimension drawing) Type B (See the dimension drawing) Pressure range 0.5mH2O 0001 Tutti i dati ed i contenuti di questa scheda sono di proprietà esclusiva di Riels Instruments Customer Cable length [x]m x=cable length Output Signal 42 4…20 mA + HART communication Accuracy 01 Customer Electrical Connection 1 PTFE cable Housing 0 Titanium alloy Diaphragm 6 Titanium alloy Tantalum alloy