Catalogs >
Riels Instruments >
RGRF18S Optical Level Switch Riels® Instruments

RGRF18S Optical Level Switch Riels® Instruments
2Pages

Catalog excerpts

RGRF18S Optical Level Switch Riels® Instruments - 1

OPTICAL LEVEL SWITCH LEVELS SENSORS RGRF18S optical level switch Tutti i dati ed i contenuti di questa scheda sono di proprietà esclusiva di Riels Instruments The RGRF18S of Riels®Instruments is a compact optical level switch which is characterized mainly by its extremely simple commissioning. The proven technology of the energetic photoelectric proximity sensor from Riels®Instruments is the foundation for the sensor. This allows for easy, rugged and reliable sensor construction. Thanks to the use of high-quality materials such as stainless steel 316L and polysulfone as well as the housing design in enclosure rating IP69, the RGRF18S guarantees high process reliability, even under harsh ambient conditions outside the tank. Quick and problem-free commissioning, without medium calibration, reduces not only commissioning costs, but also maintenance. Due to the optical technology, the RGRF18S is particularly well-suited for water-based media. At a glance • Robust level monitoring in liquid without additional requirements • Small, compact design; no medium calibration required • Process temperature up to 55°C, process pressure up to 16 bar • IP 67 and IP 69 enclosure rating • Process connection G½ • Highly medium resistant due to stainless steel housing 316L polysulfone apex • Output available as PNP or NPN transistor • FDA-compliant, UL Your benefits • Small, compact sensor ideal for difficult installation conditions with limited space • Quick commissioning without medium calibration saves time and money • No moving mechanical parts reduce maintenance and eliminate the need to recalibrate -- even after long periods of use. Features Medium Measurement Process pressure Process temperature UL approval Light source Type of light Wavelength Fluids switch -0.5 bar÷16 bar -25°C÷55°C √ LED Red light 650 nm Ambient data Mechanical data Housing material Process connection Wetted parts Stainless steel 316L G 1/2 Stainless steel 316L, polysulfon, FPM Electrical data Supply voltage Ripple Power consumption Output signal Connection type Response time Signal voltage HIGH Signal voltage LOW Output current Switching frequency Enclosure rating Protection class Switching output Ambient temperature, operation Ambient temperature, storage Dimensional drawing 10 V DC÷30 V DC 1) ≤ 5 Vpp 2) ≤ 30 mA at 24 V without output load 1x PNP 3) M12x1, 4-pin 10 ms Vs - 3 V ≤3V ≤ 100 mA 4) 250 Hz 5) IP 67: EN 60529, IP 69: EN 40050 III NO VS connections reverse-polarity protected May not exceed or fall short of VS tolerances 3) 4) Output overcurrent and short-circuit protected 5) With light/dark ratio 1:1 1) 2)

Open the catalog to page 1