FLOAT SWITCH FLOAT SWITCH FOR WATER UP TO 130°C Float switch insensitive to humidity and condesation realised to control directly the liquid or water - vapour level up to a max. temperature of 130°C and max. pressure of 4 bar. Because of the temperature at which the regulator is used, the outer casing is made in 304 AISI stainless steeland the electric cable is equipped with outer sheath resistant to high temperatures. To determine a level drop, of the controlled liquid, of more than 1,5 - 2 cm, it is necessary to fit 2 regulators, one at the highest and one at the lowest level point, or to arrange a regulator timed intervention. LEVEL SWITCH TECHNICAL CHARACTERISTICS • Electric cable 2 x 1 mm2 + G , with silicone sheaths heat resistant up to 130°C Tutti i dati ed i contenuti di questa scheda sono di proprietà esclusiva di Riels Instruments • 304 AISI stainless steel outer casin. • Mechanical switch max. 0,25A 60V a.c. 3VA • Non-hygroscopic closed cells injection of expanded polyurethane in the regulator to eliminate the air and to seal hermetically the unit. • Max. working pressure 4 bar. Information: • Level regulator for liquids. • Device of command on flexible cable. • Right for environment at normal pollution. • Power supply cable not replaceable, in case of damage the entire device must be rejected. TYPE OF ACTION 1B CABLE GLAND COUNTERWEIGHT PANEL WITH INPUT FOR2 LEVEL REGULATORS AND SINGLECHANGE OVER OUTPUT, UP TO2HP 220V A.C.50 HZ.

VAPOUR PRODUCTION PLANT WITH TANK OF RETURN CONDENSE Tutti i dati ed i contenuti di questa scheda sono di proprietà esclusiva di Riels Instruments 1-Command of water supply 2-Command of reserve water supply 3-Boiler stall