Catalogs >
RIELLO UPS >
Sentinel RT 6-10 kVA

Sentinel RT 6-10 kVA
4Pages

Catalog excerpts

Sentinel RT True-ON LINE Rack/Tower UPS System 6-10 kVA/kW HIGHLIGHTS • Power factor 1 kW = kVA • Simplified installation • High quality output voltage • High battery reliability SENTINEL RT is designed to power critical loads such as servers, storage systems, telephone equipment, medical systems and industrial applications. The UPS is ideal for Blade servers with an input power factor close to Unity (1). The UPS has can be used as tower UPS or within a rackmount cabinet, and takes up only 2U in height. SENTINEL RT has a modern design, choice of functional formats, and represents the state-of-the-art technology from the Riello UPS research & development team. The UPS can achieve an ON LINE operating efficiency of 92%. For critical business continuity applications requiring long runtimes, SENTINEL RT can be installed with battery extension packs. The UPS also incorporates the Riello UPS ‘power-off’ function found in other ECO Line UPS. SENTINEL RT is designed to save energy when no loads are connected. SIMPLIFIED INSTALLATION Tower or Rackmount UPS: SENTINEL RT can be installed as tower or 19” rack mount UPS, with a front mimic panel that can be turned through 90° to suit the installation. • Noise Free Operation (<40 dBA): the UPS can be installed in any environment thanks to its PWM digitally-controlled high frequency inverter. • High Temperature Operation: UPS components are sized for high temperature operation up to 104 °F (40 °C) and are not therefore stressed during normal operational environments.

Open the catalog to page 1

REDUCED MANAGEMENT COSTS SENTINEL RT can be programmed remotely via software or set manually from the front mimic panel to operate in a range of energy saving operating modes: • ON LINE: maximum power protection and output voltage waveform quality (efficiency up to 92%); • ECO Mode: to increase efficiency (up to to 98%), allows for the selection of Line Interactive technology (VI) to power low priority loads from the mains supply; • SMART ACTIVE: the UPS automatically decides upon the operating mode (VI or VFI) based on the quality of the mains power supply; • STANDBY OFF: the operating...

Open the catalog to page 2

Front view Rear view DRY CONTACTS COMMUNICATION PORT EXTERNAL MAINTENANCE BYPASS SWITCH PORT REMOTE CONTROL TERMINAL PORT OUTPUT GROUND OUTPUT TERMINAL (LINE+NEUTRAL) INPUT TERMINAL (LINE+NEUTRAL) COMMUNICATION CARD SLOT

Open the catalog to page 3

INPUT Rated Power [VA] Rated voltage [V] Voltage tolerance [V] Frequency [Hz] Frequency tolerance [Hz] Power Factor Current distortion BYPASS Voltage tolerance [V] Frequency tolerance [Hz] Number phases OUTPUT Rated power [kVA] Active Power [kW] Voltage [V] option UPS Voltage [V] option with transformer cabinet Number phases Crest factor [Ipeak/Irms] Waveform Frequency [Hz] Voltage distortion with non linear load Voltage distortion with linear load OVERLOAD TIMES 100% <Load <110% 125% = Load <150%/130% Load >150%/130% BATTERIES Type Typical recharge time DC Voltage ENVIRONMENTAL Maximum...

Open the catalog to page 4