Catalogs >
RIELLO UPS >
Multi Guard Industrial

Multi Guard Industrial
4Pages

Catalog excerpts

^rielloups Multi Guard Industrial 20 x 160 kVA 20 x 160 kVA HIGHLIGHTS • High adaptability to input voltage • Zero impact source • Compatible with industrial environments • Modular Plug & Play solution • Complete flexibility The Multi Guard Industrial range was specially developed to ensure power continuity in all sectors deemed critical due to the specific environmental conditions or industrial processes requiring protection. Multi Guard Industrial is available in a 20 kVA standalone version and in modular versions from 20 to 160 kVA. The two versions are available in both single-phase and three-phase output configurations. This high level of flexibility allows Multi Guard Industrial to accept both singlephase and three-phase inputs with no need for special set ups or operator intervention, ensuring full compatibility with any power supply network. HIGH ADAPTABILITY TO INPUT VOLTAGE Multi Guard Industrial is available in two versions: single-phase and three-phase output, whilst the input stage accepts both a triplet of three-phase supplies out-of-phase by 120° (three-phase 400 V+N) or a triplet of power supplies in phase (single-phase 230 V+N). Thanks to its power supply recognition function the UPS is able to adapt to the input power supply with no need for additional configuration, ensuring the same performance under both applied voltage conditions. ZERO IMPACT SOURCE Thanks to the technology it employs, Multi Guard Industrial solves all problems

Open the catalog to page 1

Parallel configuration and programmable relay contacts board. connected with insertion into power supply grids with limited power, where the UPS is supplied by a generator and where the same network includes single-phase (e.g. railway voltage) and three-phase (e.g. emergency power supply from a generator) supplies. Multi Guard Industrial has zero impact on the power supply source, whether it is a mains grid or generator set, single-phase or three-phase: • Power supply voltage recognition (single/ three-phase), with no need for setting up or reconfiguring parameters; • Input current...

Open the catalog to page 2

requirements typical of this application. Aside from the distinction between single-phase and three-phase output voltages, the UPS module can be used as a standalone unit or in a parallel configuration; by simply adding the parallel configuration board in the slot on the front of the module, the UPS can grow as requirements demand (from 20 to 160 kVA). Multi Guard Industrial ensures horizontal scalability that minimises the system footprint, the user can thus have power capabilities from 20 to 80 kVA without increasing the footprint. This is particularly advantageous when the system is...

Open the catalog to page 3

GMI single-phase output (GMI M) from 20 kVA to 160 kVA GMI three-phase output (GMI T) from 20 kVA to 160 kVA Voltage tolerance [V] Frequency tolerance [Hz] Power factor BYPASS Rated voltage [V] Voltage tolerance [V] Rated frequency [Hz] Frequency tolerance [Hz] Overload 180 / 264 (selectable) referring to neutral phase 50 or 60 ±5% (selectable) 125% for 60 min.; 150% for 18 min. OUTPUT Voltage [V] Voltage stability Frequency [Hz] UPS MODULE Power [kVA/kW] Output power [kVA] BATTERIES 220 / 230 / 240, single-phase + N (selectable) 380 / 400 / 415, three-phase + N (selectable) 20 / 18 20 x...

Open the catalog to page 4