High-Performance 3D Laser Scanner for Industrial Applications • high speed data acquisition with up to 550,000 measurements/sec. • mounting and operation possible in any orientation • high-accuracy, high precision ranging based on echo digitization, online waveform processing, and multiple-time-around processing • excellent multiple target capability Due to its ingenious design the scanner can be mounted and operated in any orientation and thus optimally adapted to the requirements of the operating environment. The RIEGL VZ-200 provides a unique and unrivalled combination of wide field-of-view, high accuracy, and extremely fast data acquisition. High-performance pulsed laser ranging, based on RIEGL‘s state-of-the-art Waveform-LiDAR technology – offering echo signal digitization with subsequent online waveform analysis – results in accurate measurement capabilities with excellent multiple target echo discrimination. As the scanner operates at extremely high laser pulse repetition rates, laser ranging by pulsed time-of-flight ranging normally will become ambiguous. By means of applying the RIEGL library RiMTA, data provided by the VZ-200 are reliably assigned to the correct MTA zone and thus range values are given correctly. The RiMTA library is available for all major platforms and makes use of any GPU available to further speed up processing. • superior measurement capability in adverse visibility conditions The High Speed High Performance 3D Laser Scanner RIEGL VZ-200 is a rugged and fully portable sensor especially designed for the rapid acquisition of high-quality three dimensional point cloud data even under high demanding environmental conditions in industrial environments. • high laser pulse repetition rate of up to 1.2 MHz • orientation sensors fully integrated • electrical interfaces for time synchronization of scan data Scanner control and acquisition of the binary RIEGL raw RXP-datastream are supported by the RiVLib software library. Typical applications include • Process Automation of Stackers and Reclaimers • Measurement of Stock Piles and Bulk Material • Topography and Mining visit our website www.riegl.com Terrestrial Laser Scanni

SystemVZ-200 Configuration RIEGL Main Dimensions Copyright RIEGL Laser Measurement Systems GmbH © 2025 – All rights reserved. Preliminary Data Sheet

tilted mounting upside down mounting vertical (upright) mounting Max. Measurement Range RIEGL VZ®-200 600 kHz Laser Pulse Repetition Rate 300 kHz Laser Pulse Repetition Rate Target Reflectance [%] Target Reflectance [%] white marble white plaster work, limestone cliffs, sand, masonry terra cotta deciduous trees coniferous trees 200 cliffs, sand, masonry terra cotta deciduous trees coniferous trees white marble construction concrete white plaster work, limestone visibility 23 km visibility 15 km visibility 8 km visibility 5 km visibility 3 km visibility 2 km visibility 1 km visibility 0.5 km construction...

Max. Measurement Range RIEGL VZ®-200 1200 kHz Laser Pulse Repetition Rate 425 375 MTA4 350 cliffs, sand, masonry construction concrete terra cotta deciduous trees coniferous trees Target Reflectance [%] white marble white plaster work, limestone Target Reflectance [%] white plaster work, limestone cliffs, sand, masonry visibility 23 km visibility 15 km visibility 8 km visibility 5 km visibility 3 km visibility 2 km visibility 1 km visibility 0.5 km construction concrete deciduous trees terra cotta visibility 23 km visibility 15 km visibility 8 km visibility 5 km visibility 3 km visibility 2 km...

Technical Data RIEGL VZ-200 Laser Product Classification Class 1 Laser Product according to IEC 60825-1:2014 The following clause applies for instruments delivered into the United States: Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed.3., as described in Laser Notice No. 56, dated May 8, 2019. Range Measurement Performance 1) Measuring Principle / Mode of Operation time of flight measurement, echo signal digitization, online waveform processing, multiple-time-around processing capability, single pulse ranging Laser Pulse Repetition Rate PRR (peak) 2) 3) Effective...

RIEGL Laser Measurement Systems GmbH, Headquarters RIEGL USA Inc., Headquarters North America RIEGL RIEGL RIEGL RIEGL Japan Ltd. China Ltd. Australia Pty Ltd. Canada Inc. RIEGL RIEGL RIEGL RIEGL Copyright RIEGL Laser Measurement Systems GmbH © 2025 – All rights reserved. Use of this Data Sheet other than for personal purposes requires RIEGL’s written consent. This Data Sheet is compiled with care. However, errors cannot be fully excluded and alternations might be necessary. UK Ltd. Asia Pacific Ltd. South America SpA Deutschland Vertriebsgesellschaft mbH Preliminary Data Sheet, RIEGL VZ-200,...