Catalogs >
RIEGL LMS >
RIEGL VUX-240-24

RIEGL VUX-240-24
6Pages

Catalog excerpts

Lightweight Airborne Laser Scanner with Online Waveform Processing • measurement rate up to 2,000,000 meas./sec • scan speed up to 600 lines/second • operating flight altitude up to 1,430m / 4,700 ft • Field of View up to 75° • perfectly linear and parallel scan lines With its wide field of view of 75 degrees and an extremely fast data acquisition rate of up to 2.4 MHz, the instrument is perfectly suited for high point density applications. A continuously rotating polygon mirror wheel enables scan speeds of up to 600 lines per second, for efficiently covering large areas when operated from fast UAVs or aircraft. The VUX-24024 makes use of RIEGL‘s unique Waveform-LiDAR technology, allowing echo digitization and online waveform processing. Multi-target resolution is the basis for penetrating even dense foliage. • cutting edge RIEGL technology providing: - echo signal digitization - multiple target capability - online waveform processing - multiple-time-around processing The RIEGL VUX-24024 is the new version of the proven RIEGL VUX-240, offering higher pulse repetition rates and faster scanning speed for further increased field performance and workflow efficiency. The sophisticated design enables integration with UAS/UAV/RPAS and adequate crewed aero planes or helicopters. • laser pulse repetition rate up to 2.4 MHz • compact & lightweight • easily mountable to unmanned platforms (UAVs) and to helicopters, gyrocopters, and other crewed aircraft The scanner provides an internal data storage capacity of 2 TByte and is equipped with interfaces for an external IMU/GNSS system as well as to control up to four external cameras. • mechanical and electrical interface for IMU/GNSS integration (optional) • interfaces for up to 4 optional cameras • scan data storage on internal 2 TByte SSD Memory • removeable CFAST® memory card Typical applications include • Corridor Mapping: Power Line, Railway Track and Pipeline Inspection • Topography in Open-Cast Mining • Surveying of Urban Environments • Archeology and Cultural Heritage Documentation • Agriculture & Forestry visit our website www.riegl.com

Open the catalog to page 1

Laser Product Classification NOHD (Nominal Ocular Hazard Distance) 1 2) ENOHD (Extended Nominal Ocular Hazard Distance) 1 3) 1) NOHD and ENOHD stated for operating the device from an aircraft flying at a speed higher than 1 kn. Range Measurement Performance Measuring Principle Class 3R Laser Product according to IEC60825-1:2014 The following clause applies for instruments delivered into the United States: Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed.3., as described in Laser Notice No. 56, dated May 8, 2019. 0 m 0 m 4) Rounded average PRR. 5) Typical...

Open the catalog to page 2

Operating Flight Altitude AGL given for the following conditions: FOV 75°, ambiguity resolved by multiple-time-around (MTA) processing, average ambient brightness, target size > laser footprint, roll angle ±5 Example: VUX-24024 at 300,000 pulses/sec, laser power level 100% Altitude = 2,100 ft AGL, Speed 60 kn, resulting point density ~ 8.3 pts/m2 Operating Flight Altitude AGL given for the following conditions: FOV 75°, ambiguity resolved by multiple-time-around (MTA) processing, average ambient brightness, target size > laser footprint, roll angle ±5 Example: VUX-24024 at 600,000...

Open the catalog to page 3

. Measurement Range [m] Max. Measurement Range [m] Operating Flight Altitude AGL given for the following conditions: FOV 75°, ambiguity resolved by multiple-time-around (MTA) processing, average ambient brightness, target size > laser footprint, roll angle ±5 Example: VUX-24024 at 1,800,000 pulses/sec, laser power level 100% Altitude = 1,250 ft AGL, Speed 60 kn, resulting point density ~ 83.1 pts/m2 Operating Flight Altitude AGL given for the following conditions: FOV 75°, ambiguity resolved by multiple-time-around (MTA) processing, average ambient brightness, target size > laser footprint,...

Open the catalog to page 4

—connector panel -3x M6x1 -6H threads, depth 7mm each side —4x CAM connectors for camera integration —CFast® card slot 4x M6x1 - 6H threads, depth 8.5mm Data Sheet Copyright RIEGL Laser Measurement Systems GmbH © 2024- All rights reserved. 5

Open the catalog to page 5

Technical Data RIEGL VUX®-24024 (continued)Data Storage Internal Data Storage Solid State Disc SSD, 2 TByte Memory Card Slot for CFAST® 1) industrial memory card 480 GByte 1) CFast is a registered trademark of CompactFlash Association External IMU & GNSS (optional) IMU Accuracy 3) Roll, Pitch Heading IMU Sampling Rate Position Accuracy (typ.) System Total Weight (approx.) 5) 2) See technical details at the according Applanix datasheet 4) May require local gravity model to achieve full accuracy 3) Accuracy specifications for post-processed data 5) Single scanner with AP+board and with...

Open the catalog to page 6