Catalogs >
RIEGL LMS >
RIEGL VUX-180-24

RIEGL VUX-180-24
6Pages

Catalog excerpts

UAV LiDAR Sensor for High-Speed Corridor Mapping • scan speed up to 800 lines/second • laser pulse repetition rate up to 2.4 MHz • measurement rate up to 2,000,000 meas./sec • operating flight altitude up to 980 m / 3,250 ft • Field of View up to 75° • compact & lightweight (2.7 kg / 5.9 lbs) • cutting edge RIEGL technology providing: - echo signal digitization - multiple target capability - online waveform processing - multiple-time-around processing • easily mountable to unmanned platforms (UAVs) and small manned aircraft • mechanical and electrical interface for IMU/GNSS integration • interfaces for up to 5 external cameras • scan data storage on internal SSD Memory • removeable CFAST® memory card The RIEGL VUX-18024 is a lightweight and versatile airborne laser scanner offering a wide field of view of 75 degrees and an extremely high pulse repetition rate of up to 2.4 MHz. These features – in combination with an increased scan speed of up to 800 lines/ second – make the RIEGL VUX-18024 perfectly suited for high speed surveying missions and applications where an optimal line and point distribution is required. The RIEGL VUX-18024 makes use of RIEGL’s unique Waveform-LiDAR technology, allowing echo digitization and online waveform processing. Multi-target resolution is the basis for penetrating even dense foliage. For smooth and straight forward data storage, the scanner provides an internal data storage capacity of 2 TByte and a removeable CFast® card. Interfaces for the integration of an appropriate external IMU/GNSS system and up to five optional external cameras are available. The sophisticated design of the RIEGL VUX-18024 – already proven in the RIEGL VUX-120, VUX-160, and VUX-240 series – enables smooth integration with fast-flying UAS/UAV/RPAS, small manned aeroplanes and helicopters. It is offered both, as stand-alone UAV LiDAR sensor and also in various fully-integrated UAV-based laser scanning system configurations with appropriate IMU/GNSS system and optional cameras. This allows the scanner to perfectly meet all the specific requirements of the customers‘ applications. Typical applications include • High-Speed Corridor Mapping and High-Density Applications: e.g. mapping and monitoring of critical infrastructure like power lines, railway tracks, pipelines, runways • Topography in Open-Cast Mining • Surveying of Urban Environments • Agriculture & Forestry visit our website www.r

Open the catalog to page 1

Technical Data RIEGL VUX®-18024 Laser Product Classification Class 3R Laser Product according to IEC60825-1:2014 The following clause applies for instruments delivered into the United States: Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed.3., as described in Laser Notice No. 56, dated May 8, 2019. NOHD (Nominal Ocular Hazard Distance) 1) 2) ENOHD (Extended Nominal Ocular Hazard Distance) 1) 3) 1) NOHD and ENOHD stated for operating the device from an aircraft flying at a speed higher than 1 kn. Range Measurement Performance Measuring Principle For a...

Open the catalog to page 2

Maximum Measurement Range & Point Density RIEGL VUX®-18024 Operating Flight Altitude AGL given for the following conditions: FOV 75°, ambiguity resolved by multiple-time-around (MTA) processing, average ambient brightness, target size ≥ laser footprint, roll angle <±5 deg Example: VUX-18024 at 300,000 pulses/sec, laser power level 100% altitude 1,300 ft AGL, speed 60 kn, resulting point density ~ 13.3 pts/m² Operating Flight Altitude AGL given for the following conditions: FOV 75°, ambiguity resolved by multiple-time-around (MTA) processing, average ambient brightness, target size ≥ laser...

Open the catalog to page 3

Maximum Measurement Range & Point Density RIEGL VUX®-18024 Operating Flight Altitude AGL given for the following conditions: FOV 75°, ambiguity resolved by multiple-time-around (MTA) processing, average ambient brightness, target size ≥ laser footprint, roll angle <±5 deg Example: VUX-18024 at 1,800,000 pulses/sec, laser power level 100% altitude 600 ft AGL, speed 30 kn, resulting point density ~ 346.3 pts/m² Operating Flight Altitude AGL given for the following conditions: FOV 75°, ambiguity resolved by multiple-time-around (MTA) processing, average ambient brightness, target size ≥ laser...

Open the catalog to page 4

Technical Data VUX®-18024 General Technical Data Power Supply Input Voltage / Consumption 1) Main Dimensions (L x W x H) Weight Humidity Protection Class Max. Flight Altitude (operating & not operating) Temperature Range 18 - 34 V DC / typ. 65 W 283 mm x 117 mm x 134 mm 2.7 kg (with connection box) max. 80 % non condensing @ 31°C IP64, dust and splash-proof 18 500 ft (5 600 m) above MSL (Mean Sea Level) -10°C up to +40°C (operation) / -20°C up to +50°C (storage) Data Storage Internal Data Storage Memory Card Slot 1) 2) Solid State Disc SSD, 2 TByte for CFAST® 2) industrial memory card 1...

Open the catalog to page 5

RIEGL VUX®-18024 System Integration The RIEGL VUX-18024 can be optionally complemented with an appropriate IMU/GNSS system. External IMU & GNSS (optional) AP+board (fully integrated) IMU Accuracy 2) Roll, Pitch 0.010° 0.005° Heading 0.025° 0.010° IMU Sampling Rate 200 Hz 200 Hz Position Accuracy (typ.) 0.02 - 0.05 m 0.02 - 0.05 m System Total Weight (approx.) 3) 3.2 kg 3.2 kg external IMU 1) 2) See technical details at the according Applanix datasheet Accuracy specifications for post-processed data Single scanner with AP+board and with external IMU sensor RIEGL Laser Measurement Systems...

Open the catalog to page 6