„NFB“ (Nadir/Forward/Backward) Scanning UAV LiDAR Sensor • laser pulse repetition rate up to 2.4 MHz • measurement rate up to 2,000,000 meas./sec • scan speed up to 400 lines/second • operating flight altitude up to 720 m / 2,350 ft • Field of View up to 100° • compact & lightweight (2.3 kg / 4.4 lbs) • Nadir/Forward/Backward Scanning for unrivaled completeness of scan data even on vertical structures and narrow canyons • cutting edge RIEGL technology providing: - echo signal digitization - multiple target capability - online waveform processing - multiple-time-around processing • easily mountable to unmanned platforms (UAVs) and small manned aircraft • mechanical and electrical interface for IMU/GNSS integration • interfaces for up to 2 external cameras • scan data storage on internal SSD Memory • removeable CFAST® memory card The RIEGL VUX-12023 is a lightweight and versatile airborne laser scanner offering a wide field of view of 100 degrees and an extremely high pulse repetition rate of up to 2.4 MHz. Thus, it is perfectly suited for high point density corridor mapping applications. The measuring beam of the RIEGL VUX-12023 is consecutively emitted in three different directions: it alternates from strictly nadir, to +10 degrees forward, and to -10 degrees backward. This allows data acquisition with an unrivaled completeness in data capture, especially in challenging environments with vertical surfaces and narrow canyons. The scanner provides an internal data storage capacity of 2 TByte and a removeable CFast card and is equipped with interfaces for integration of an external IMU/GNSS system. Additionally, interfaces for up to two optional external cameras are available. The sophisticated design of the RIEGL VUX-12023 allows smooth integration on UAS/UAV/RPAS, small manned aeroplanes (like gyrocopters), but also on helicopters. It is offered both, as stand-alone UAV LiDAR sensor and also in various fully-integrated UAV-based laser scanning system configurations with appropriate IMU/GNSS system and optional cameras. This allows the scanner to perfectly meet all the specific requirements of the customers‘ applications. Typical applications include • Corridor Mapping: Power Line, Railway Track and Pipeline Inspection • Topography in Open-Cast Mining • Surveying of Urban Environments • Archeology and Cultural Heritage Documentation • Agriculture & Forestry visit our website www.rieg

RIEGL VUX-12023 Scan Pattern „NFB“ (Nadir/Forward/Backward) top view side view Forward Scan Line Nadir Scan Line Backward Scan Line Nadir Scanning Flight Direction Forward/Backward Scan Angle in Swath Center Forward/Backward Scan Angle at Swath Edges The RIEGL VUX-12023 offers a sophisticated scan pattern consisting of scan lines with periodically changing directions. The scan directions in the center of the scan lines change consecutively from strictly nadir, to +10 degrees forward and to -10 degrees backward. This scan pattern provides an almost complete 3D data set, as also vertical surfaces...

Maximum Measurement Range & Point Density RIEGL VUX®-12023 PRR = 150 kHz Operating Flight Altitude AGL given for the following conditions: FOV 100°, ambiguity resolved by multiple-time-around (MTA) processing, average ambient brightness, target size ≥ laser footprint, roll angle ±5 Example: VUX-12023 at 150,000 pulses/sec, laser power level 100% Altitude = 1,500 ft AGL, Speed 60 kn, resulting point density ~ 4 pts/m² Operating Flight Altitude AGL given for the following conditions: FOV 100°, ambiguity resolved by multiple-time-around (MTA) processing, average ambient brightness, target size ≥...

Maximum Measurement Range & Point Density RIEGL VUX®-12023 PRR = 1200 kHz Operating Flight Altitude AGL given for the following conditions: FOV 100°, ambiguity resolved by multiple-time-around (MTA) processing, average ambient brightness, target size ≥ laser footprint, roll angle ±5 Example: VUX-12023 at 1,200,000 pulses/sec, laser power level 100% Altitude = 600 ft AGL, Speed 30 kn, resulting point density ~ 150 pts/m² Operating Flight Altitude AGL given for the following conditions: FOV 100°, ambiguity resolved by multiple-time-around (MTA) processing, average ambient brightness, target size...

Dimensional Drawings RIEGL VUX®-12023 RIEGL VUX-12023 UAV LiDAR Sensor with Connection Box Data Sheet Copyright RIEGL Laser Measurement Systems GmbH © 2024 – All rights reserved.

Dimensional Drawings RIEGL VUX®-12023 RIEGL VUX-12023 UAV LiDAR Sensor with Interface Box Copyright RIEGL Laser Measurement Systems GmbH © 2024 – All rights reserved. Data Shee

Technical Data RIEGL VUX®-12023 Laser Product Classification Class 1 Laser Product according to IEC60825-1:2014 The following clause applies for instruments delivered into the United States: Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed.3., as described in Laser Notice No. 56, dated May 8, 2019. Range Measurement Performance Measuring Principle Laser Pulse Repetition Rate PRR 1) Max. Measuring Range 2) 3) natural targets  ≥ 20 % natural targets  ≥ 60 % natural targets  ≥ 80 % Max. Operating Flight Altitude AGL 2) 4) @  ≥ 20 % @  ≥ 60 % Max. Number of...

Technical Data RIEGL VUX®-12023 Data Storage Internal Data Storage Memory Card Slot Solid State Disc SSD, 2 TByte for CFAST® 1) industrial memory card 480 GB (can be upgraded to 1 TByte) External IMU & GNSS (optional) Applanix APX-20 UAV 3) Applanix AP+50 3) 4) IMU Accuracy Roll, Pitch 0.015° 0.005° Heading 0.035° 0.010° IMU Sampling Rate 200 Hz 200 Hz Position Accuracy (typ.) 0.02 - 0.05 m 0.02 - 0.05 m System Total Weight (approx.) 3.0 kg 3.6 kg 5) 2) CFast is a registered trademark of CompactFlash Association. Accuracy specifications for post-processed data See technical details at the according...