Catalogs >
RIEGL LMS >
RIEGL VMX-RAIL

RIEGL VMX-RAIL
6Pages

Catalog excerpts

5.4 MHz pulse repetition rate, and 750 lines per second resulting in up to 13,000 pts/m2 in approximately 3 m range at 80 km/h platform speed The RIEGL VMX-RAIL is a fully integrated Mobile Laser Scanning System for track mapping and clearance surveying. The triple scanner system design allows for utmost efficient capturing of dense, accurate, and feature-rich data. Take advantage of the VMX-RAIL for • accurate surveying in challenging environments • reliable capturing of railway infrastructure, topography, and vegetation • platform speed up to 130 km/h for operation during regular rail schedules • reduction of scan shadows by triple scanner system design • flexible camera options to complement scan data with high resolution imaging • data export to Third-Party Rail-Processing Software Packages Triple Scanner Mobile Mapping System Specifically Designed for Rail Application Typical Applications • Rapid and Safe Data Capture with Minimal Disruption to Network Schedules • Rail Infrastructure Asset Management • As-Built Surveying • Track and Infrastructure Monitoring • Clash Detection Simulation and Clearance Analysis • Railway Planning and E

Open the catalog to page 1

RIEGL VMX-RAIL VMX-RAIL Key Features • rugged measuring-head for reliable long-term operation in harsh environments • equipped with 3 VUX-1HA22 High Accuracy Laser Scanners • optimized scanner orientation to increase the field of view and to minimize scan shadows • unique crossed point cloud pattern along 360 degree of the clearance profile for improved feature extraction and small object detection • 5.4 MHz pulse repetition rate and 750 lines per second resulting in up to 13,000 pts/m2 in approximately 3 m range at 80 km/h platform speed RIEGL VMX-RAIL scan data State-of-the-Art Track...

Open the catalog to page 2

at a glance RIEGL VMX-RAIL RIEGL VMX-RAIL Components and Setup GNSS antenna protective housing for enhanced scan head protection (3x) RIEGL VUX-1HA22 laser scanner (3x) VMX-RAIL-MH Measuring Head thermo-electronic elements and forced-air cooling RIEGL cameras (optional) main electronics unit: IMU/GNSS electronics, distribution of power supply and synchronization signals, camera control unit, control electronics for thermo-electric elements lifting point shock absorbers RIEGL VMX-RAIL System Block Diagram VMX-RAIL-RM Roof Mount RIEGL VMX-RAIL System Components • VMX-RAIL-MH: temperature...

Open the catalog to page 3

at a glance RIEGL VMX-RAIL RIEGL VMX-RAIL VMX-RAIL-MH Measuring Head VMX-RAIL-RM Roof Mount VMX-RAIL-CR Control Rack VMX-RAIL-MC Main Cable 654 x 1456 x 406 mm 837 x 1340 x 412 mm min. 500 mm stack space requirement in a 19” rack tailored cable length RIEGL VMX-RAIL-CR • 19 inch rack based control unit for fixed installation in a rail car • The VMX-RAIL Main Cable is connected with a Harting® connector to the rear of the VMX-RAIL Control Rack. RIEGL VMX-RAIL-CM Control Module * 4 rack units AC/DC power supply * 1 rack unit scan and image data acquisition computer * 4 rack units...

Open the catalog to page 4

RIEGL VMX-RAIL RIEGL VMX-RAIL Technical Data 475m max. measurement range optional digital camera pulse repetition rate (peak) online waveform processing multiple target capability eye safe operation at Laser Class 1 VMX-RAIL Scanner Performance Laser Class 1 (Class 1 Laser Product according to IEC 60825-1:2014) Laser Class Max. Range, Target Reflectivity  ≥ 10% 2) 3) Effective Measurement Rate Max. Range, Target Reflectivity  ≥ 80% Max. Number of Targets per Pulse Minimum Range Scan Speed (selectable) 1) Rounded values, selectable by measurement program. 2) Typical values for average...

Open the catalog to page 5

RIEGL VMX-RAIL at a glance Data Interfaces VMX-RAIL-MH 6x multi-purpose ports supporting complementary camera systems and additional devices, each with - trigger pulse - precise time stamping of exposure pulse - NMEA data - PPS - LAN 1GigE - power 24 V DC, max. 30 W VMX-RAIL-CR 1x DMI input (for distance measuring indicator; odometer) 1x NAV RS-232 (COM port for IMU/GNSS for RTK, SBAS) 1x NAV RS-232 (COM output for synchronization of external device) 1x AUX power supply output (+28 V DC, max 30 W) 1x rack-based industrial PC with standard interfaces: -) LAN, 1000 Mbit/sec (e.g. to connect...

Open the catalog to page 6