Communication Box for RIEGL V-Line Laser Scanners RIEGL scanners are often used in fixed installations in remote environments. For this application, a stable hardware power supply and remote operation of the system are mandatory. In the unlikely event of any hardware/ firmware failure, the system shall automatically reboot and continue with the specified data acquisition tasks on the scanner. To enable a stable and seamless remote 24/7 operation of RIEGL V-Line scanners, RIEGL offers the V-Line CB 23. The housing of the CB 23 is designed for usage in harsh environment and consists of a number of hardware components. » enables stable 24/7 remote system operation » operation within a wide temperature range (-20° to +50° C) » compact and water proved housing » high accurate environmental data by external sensor » IP64 for usage in harsh environment » one Power IN connector to support all connected devices (including the scanner) Hardware Components, Functionality & Technical Data Power Supply Input Voltage Copyright RIEGL Laser Measurement Systems GmbH © 2025- All rights reserved. Use of this data sheet other than for personal purposes requires RIEGLs written consent. This data sheet is compiled with care. However, errors cannot be fully excluded and alternations might be necessary.

USB mass storage device switched power supply Watchdog RIEGL V-Line UB23 Circuit Breaker Legend: power supply + power supply + (switched by Watchdog relay: CH1) power supply + (switched by Watchdog relay: CH2) TCP/IP sensor, antenna cables MOBILE MAIN internal environmental sensor dehumidifier unit external environmental sensor The integrated sim card of a local network operator enables LTE Internet connection. The pre-installed VPN connection protects the system from unauthorized access and enables remote access and configuration of all integrated hardware components. All necessary TCP/IP connections...