DIGITAL LASER DISTANCE METER The RIEGL LD05e-HT is a multipurpose laser distance meter based on precise time-of-flight laser range measurement. It uses state-of-the-art digital signal processing enabling precise distance measurement for complex multi-target situations even under bad visibility conditions. It is additionally optimized for very high target temperatures. Digitizing the echo signal and subsequent analyzing allows multi-target distance measurements. Five target distances can be detected and provided for each laser shot. The LD05e-HT can be configured for various application modes: • High Penetration Mode for complex target situations, based on a sequence of laser shots, self-adapting (rather low) data update rate Significant enhancement of the maximum range based on Pre-Detection-Averaging • Fast Mode with an update rate between High Penetration Mode and High Speed and Mode • Short infrared laser pulses providing excellent interference immunity • Narrow measurement beam with low divergence for excellent spatial resolution • Measurement to almost any surface regardless of the angle of incidence of the beam and the surface characteristics • Lightweight, stable aluminium housing, ready to be used in harsh industrial environments. • Different basic instrument types with pre-configured measurement modes, but also individually programmable for customer specific applications visit our webpage www.riegl.com

Technical Data LD05e-HTPerformance Examples High Penetration Model www.riegl.com Data Sheet RIEGL LD05e-HT, 2020-03-10, page 2 of 4 The following conditions are assumed • target is larger than footprint of laser beam, • perpendicular angle of incidence, • visibility 10 km • typical values for average ambient brightness conditions. In bright sunlight, the operational range is considerably shorter than under an overcast sky. At dawn or at night the range is even higher. Reflecting foil 3M DG4090 or equivalent, dimensions > 0.45 x 0.45 m2. Minimum distance 3m for full accuracy with reflecting foil...

Technical Data LD05e-HTLaser Specifications Wavelength Beam divergence 1) Laser product classification according to IEC 60825-1:2014 The following clause applies for instruments delivered into the United States: Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed.3., as described in Laser Notice No. 56, dated May 8, 2019. near infrared 2.0 x 2.6 mrad Laser Class 1M INVISIBLE LASER RADIATION DO NOT EXPOSE USERS OF TELESCOPIC OPTICS CLASS 1M LASER PRODUCT Viewing the laser output with certain optical instruments (for example telescopes and binoculars) may pose an...

Technical Data LD05e-HT Dimensional Drawings All dimensions in mm Copyright RIEGL Laser Measurement Systems GmbH © 2019 – All rights reserved. Use of this data sheet other than for personal purposes requires RIEGL’s written consent. This data sheet is compiled with care. However, errors cannot be fully excluded and alternations might be necessary. Data Sheet RIEGL LD05e-HT, 2020-03-10, page 4 of 4 RIEGL Laser Measurement Systems GmbH, 3580 Horn, Austria Tel.: +43-2982-4211, E-mail: [email protected], www.riegl.com RIEGL USA Inc., E-mail: [email protected], www.rieglusa.com RIEGL Japan Ltd.,...