RIDART CATALOG
39Pages

Vapour stop device Installed into the loading pipe 3” or 4” In case of the cap open, the valve remains closed Flow rate: 980 l/min Thread: BSP ISO 228-1 Quick adapter EN 14420-6 Art.No. Body: brass Gasket: elastopal Thread: BSP ISO 228-1 Body: brass (OT), aluminium (AL) Gasket: NBR The chain is included Symmetrical coupling Female threaded Art.No. Body: aluminium (AL), brass (OT) Thread: BSP ISO 228-1 Symmetrical coupling Male threaded Body: aluminium (AL), brass (OT) Thre

Lockable plug Art.No. Body: aluminium (AL), brass (OT) Body: Brass Thread: BSP ISO 228-1 Gasket: NBR Threaded coupling with a cap and a lock Art.No. Body: brass Thread: BSP ISO 228-1 Gasket: Viton® for loading line Art.No. Material: painted steel Plugging bored valve for pressure test Ball valve and ring material: brass Rubber expansible cylinder Shaft materi

Two stage positive shut-off Body: aluminium Pressure: 8 bar (3”), 6 bar (4”) Thread: BSP ISO 228-1 Flow rate Flow rate Two stage positive shut-off Body: aluminium Pressure: 8 bar Thread: BSP ISO 228-1 Two stage positive shut-off Body: aluminium Pressure: 4 bar Thread: BSP ISO 228-1 Flow rate Flow rate Flow rate short version Maximum fuel storage capacity Two stage positive shut-off Body: aluminium Pressure: 8 bar Thread: BSP ISO 228-1 horizontal Maximum fuel storage capacity Two stage positive shut-off Body: Aluminium Pressure: 8 bar Thread: BSP ISO 228-1

Body: aluminium Maximum pressure: 0,65 bar Thread: BSP ISO 228-1 Flow rate *On sale while stocks last, then alternative product: 442-100AL II 3G with drop tube Standard length of the tube: 1500 mm Riser pipe available on request, page 10 *On sale while stocks last, then alternative product: 442-100AL II 3G Flow rate Flow rate Flow rate Body: aluminium Maximum pressure: 0,65 bar Thread: BSP ISO 228-1 for diesel Body: aluminium Maximum pressure: 0,7 bar Thread: BSP ISO 228-1 for diesel Body: aluminium Thread: BSP ISO 228-1 Maximum pressure:

TEE Body: cast iron Thread: BSP ISO 228-1 For 4” male threaded cap see page 26 model 220 OT Fill cage Body: aluminium Thread: BSP ISO 228-1 Drop tube Art.No. Riser pipe with collar and rivets Body: aluminium Thread: Male BSP ISO 228-1 on one side Body: aluminium Thread: Male BSP ISO 228-1 on one side Drop tube diffuser Art.No. Drop tube diffuser Body: aluminium Thre

Vent Art.No. Body: brass Thread: female BSP ISO 228-1 On request protection system ATEX G IIB3 Vent Body: aluminium Thread: female BSP ISO 228-1 On request protection system ATEX G IIB3 II 2G Vent Body: aluminium/zinc plated iron On request protection system ATEX G IIB3 Pressure vacuum vent * anodized aluminium on request Body: aluminium Poppet: brass, stainless steel Thread: female BSP ISO 228-1 Pressure vacuum vent Art.No. Body: anodized aluminium Poppet material: brass, stainless steel Thread: NPT Female Flame proof element: ribbon coil stainless steel Ribbon coil standard gap (MESG):...

Pressure vacuum vent Body: aluminium Weight loaded (no spring) Thread: NPT Flame proof element: ribbon coil stainless steel Ribbon coil standard gap (MESG): 0,65 mm ATEX equipment protection Vapour recovery adaptor Body: aluminium Thread: BSP ISO 228-1 Flame proof element: ribbon coil stainless steel Ribbon coil plates: 2 units Ribbon coil standard gap (MESG): 0,65 mm Gasket: Viton® Unidirectional ATEX equipment protection Camlock cap Body: Aluminium Brass closing clamps Vapour recovery adaptor Art.No. Body: aluminium Shaft material: stainless steel Thread: BSP ISO 228-1 Gasket: Viton®...

Body: brass Flame proof element: ribbon coil stainless steel Ribbon coil standard gap (MESG): 0,65 mm Thread: BSP ISO 228-1 *Bidirectional ATEX equipment protection Body: brass Flame proof element: ribbon coil stainless steel Ribbon coil standard gap (MESG): 0,65 mm Gasket: Viton® Thread: BSP ISO 228-1 ATEX equipment protection Body: brass Flame proof element: ribbon coil stainless steel Ribbon coil standard gap (MESG): 0,65 mm Thread: BSP ISO 228-1 ATEX equipment protection Also available in stainless steel (Page 20) Body: brass Flame proof element: ribbon coil stainless steel Ribbon coil...

Double poppet foot valve Viton® gasket on lower poppet Metal seal on upper poppet Thread: female BSP ISO 228-1 Check valve Body: brass Gasket: Viton® Thread: female BSP ISO 228-1 Body: brass Screen material: steel Thread: BSP ISO 228-1 Body: brass Spring based poppet Gasket: Viton® Thread: BSP ISO 228-1 Angle check valve Angle check valve Art.No. Body: cast iron Cap and poppet material: brass Gasket: Viton® Thread: BSP ISO 228-1 Angle check valve Body: cast iron Cap and poppet material: brass Gasket: Viton® Thread: BSP ISO 228-1 *old model Body: brass Thread: BSP ISO 228-1

Shut-off check valve Body: brass Spring based poppet Gasket: Viton® Thread: BSP ISO 228-1 Vertical check valve Body: brass Double poppet Viton® gasket on lower poppet Metal seal on upper poppet Thread: BSP ISO 228-1 II 2G Inspectionable check valve Body: bronze Poppet: brass Gasket: Viton® Thread: BSP ISO 228-1 Inspectionable without being removed II 2G Under pump check valve Body: anodized aluminium Gasket: Viton® Flow rate: 190 l/min Anti-siphon valve Art.No. with strainer with strainer without strainer Body: hostaform Spring: stainless steel Gasket: O-ring Viton® Not suitable as check...

Emergency shut-off valve Body: cast iron (PTFE-coating on request) Internal parts: brass Spring: stainless steel Gasket: Viton® Flow rate: 300 l/min Thread: BSP ISO 228-1 For stainless steel version see Model 31 (Page 20) II 2G Double poppet Emergency shut-off valve Single poppet Body: aluminium Spring: stainless steel Gasket: Viton® Flow rate: 300 l/min Thread: BSP ISO 228-1 Double poppet Shear check valve Body: Aluminium Internal parts: brass Spring: stainless steel Flow rate: 65 l/min Separation force: 600 Hm Gasket: Viton® Thread: BSP ISO 228-1 For stainless steel version see Model 31...

Emergency shear valve for vapour recovery Stage 2 Body: aluminium Poppet material: brass Gasket: Viton® Thread: BSP ISO 228-1 Body: aluminium (AL) Floating ball: PPHD Flame proof element: ribbon coil stainless steel Ribbon coil standard gap (MESG): 0,65 mm Unidirectional for liquid Thread: BSP ISO 228-1 ATEX equipment protection Stainless steel Body: aluminium (AL) Floating ball: PPHD Unidirectional for liquid Bidrectional for vapour of gasoline Gasket: Viton® Thread: BSP ISO 228-1 Ball Float Vent Valve Art.No. Body: zinc plated steel Floating ball: PP/Inox Thread: BSP ISO 228-1 Body:...