Catalogs >
Ridart srl >
62 angle check valve

62 angle check valve
2Pages

Catalog excerpts

Angle Check Valve APPLICATION It’s a device in according with Directive 2014/34/EU and harmonized standard. This angle check valve is designed to prevent the drainage of fuel (loss of prime) in the suction line and permits its flow only towards dispenser. This valve is installed on the manhole lid of the underground storage tank. MOD. 62-40-65 & 62-40-50 DESCRIPTION AND DIMENSIONS PARTS CAST IRON CAST IRON CAST IRON GALVANIZED STEEL GALVANIZED STEEL O-RING SEAL RIDART s.r.l. via Adua, 17 - 21045 Gazzada Schianno (VA) ITALY P.IVA/C.F. IT 01454770122 www.ridart.it info@ridart.it +39 0332 463301 Product Certification, Declaration of Conformity, User Manual and Testing on: www.ridart.it/support The Data and Images are not binding. We reserve the right to make changes without notice. Pressure & Flow Toleranc

Open the catalog to page 1

CHEMICAL SUITABILITY - Standard Model is for traditional fuel without additivies. INSTALLATION The valve is installed on the manhole lid of the underground storage tank. Before fixing pipes to the valve be sure to use a gasoline-resistant compound for threads on inlet and outlet pipe. Do not use PTFE pipe tape which may lead to an overtightening during the installation and as a result of that the valve breaking. Use only connection parts (inlet/outlet pipes or fittings) manufactured in accordance with the European standards in order to avoid risks of wrong connections causing damages to the...

Open the catalog to page 2

62 angle check valve 2Pages

Catalog excerpts

All Ridart srl catalogs and technical brochures

62 angle check valve
2Pages