Catalog excerpts
Overfill Prevention DevicesMod. 446APPLICATION It's a Safety Accessories in according with Directive 2014/34/EU and harmonized standard EN ISO 13616. The valve is designed to prevent overfill of liquid from an aboveground and ground tank to the charging pipe installed on the tank. ATTENTION * Flow and Turbolence should modify initial and final closure level by ±20%. The best performances allowed by the new regulation: - Max operational pressure 4 bar for pressure filling. - Loading process needs operator supervisor. - Where liquid is not clear a strainer before the valve is strongly recommended in order to guarantee a proper working of the valve. Dirty particles in fact may damage the moving components causing malfunctioning. FEATURES ♦ Gravity or pumped filling ♦ Positive shut-off ♦ Fast drain hose emptying (less than 30 sec/mt.) ♦ Remote or direct filling ♦ Maximum fuel storage capacity ♦ No risk of fire or fuel leaking ♦ Easy installation INSTALLATION - Protection System is unidirectional and only for vertical installation. - The valve is installed at the highest point of the tank, normally on the manhole cover. - The final adjustment is to be made after its fixing - For correct installation follow the Directives and product User Manual. - For custom application or maintenance write to: qualitv@ridart.it. - Declaration of Conformity and User Manual are available on: www.ridart.it/support RIDART s.r.l. via Adua, 17 - 21045 Gazzada Schianno (VA) ITALY P.IVA/C.F. IT 01454770122 www.ridart.it info@ridart.it +39 0332 463301 Product Certification. Declaration of Conformity, User Manual and Testing on: www.ridart.it/support The Data and Images are not binding. We reserve the right to make changes without notice. Pressure & Flow Tolerances ±20%
Open the catalog to page 1MAINTENANCE - Periodically check the device is necessary to remove possible dirty. - The overfill prevention valve must be properly stored, handled and kept in good condition to prevent the entry of particles or the deposit of dust in the moving parts - In case of tampering warranty expires and safety protection is not guaranteed. To choose the correct overfilling valve, scan QRcode and fill in the form: RIDART s.r.l. via Adua, 17 - 21045 Gazzada Schianno (VA) ITALY P.IVA/C.F. IT 01454770122 www.ridart.it info@ridart.it +39 0332 463301 Product Certification, Declaration of Conformity, User...
Open the catalog to page 2All Ridart srl catalogs and technical brochures
-
197B3 PRESSURE/VACUUM VALVE
2 Pages
-
62 angle check valve
2 Pages
-
60 GH angle check valve
2 Pages
-
23 SHUT OFF VALVE
2 Pages
-
1521 FEMALE API COUPLER
2 Pages
-
93 VAPOR STOP 3" /4"
3 Pages
-
in line flame arrester
5 Pages
-
overfill prevention valves
4 Pages
-
1510 ANTI-SIPHON VALVE
2 Pages
-
1501 dipstick for tank
1 Pages
-
198 active coal vent
1 Pages
-
190 VENT CAP
1 Pages
-
RIDART CATALOG
39 Pages