Catalogs >
Ridart srl >
31SS SHEAR VALVE STAINLESS STEEL

31SS SHEAR VALVE STAINLESS STEEL
1Pages

Catalog excerpts

SHEAR VALVE APPLICATION It’s a Safety Accessories in according with Directive 2014/34/EU and harmonized standard EN ISO 13617-2. Installed below the dispenser on the delivery line, in case of fire or external accident, prevent fuel loss. 31 shear valves shut off the flow of AdBlue® in the event of a vehicle collision with a dispenser preventing an excessive and uncontrolled release info the environment. The optional e-coafed mounting bracket allows installation both in containment sumps beneath the dispenser as well as direct mounting to the concrete forecourt. Shear valve is available in 1” X 1”1/2 BSP threaded version C€ <£*> ii 3 G ATTENTION - Break force as rule required between 330 N m and 880 N m - Break force within parameters established by UL842 - Must be installed with rigid pipe CHEMICAL SUITABLE 31 model is made for special fuel as AdBlue® and for all solvents or chemical products compatible. MAINTENANCE - Always replace the product after fire, deflagration, brake or demage. - In case of breaking valve only the bush can be replace. Only specialized and trained technician can replace the bush. - In case of tampering warranty expires and safety protection is not guaranteed. RIDART s.r.l. via Adua. 17 - 21045 Gazzada Schianno (VA) ITALY P.IVA/C.F. IT 01454770122 www.ridart.it info@ridart.it +39 0332 463301 Product Certification. Declaration of Conformity. User Manual and Testing on: www.ridart.it/support The Data and Images are not binding. We reserve the right to make changes without notice. Pressure & Flow Tolerances ±20%.

Open the catalog to page 1

31SS SHEAR VALVE STAINLESS STEEL 1Pages

Catalog excerpts

All Ridart srl catalogs and technical brochures

31SS SHEAR VALVE STAINLESS STEEL
1Pages