190 VENT for Vapor Recovery Line The vent is normally used to allow air entry inside the tank and to help the regulata on of the tank atmosphere. The structure of the vent and a screen inside it protect the pipework from dirty, insects or other par cles avoiding vent line obstruc on. It’s an accessory according with Direc ve 2014/34/EU and harmonized standard. A en on It is not a safety device. In the presence of flammable liquid it is recommended to install an End of Line Deflagra on Flame Arrester, that can be a pressure vacuum vent Model 197 ENP or just a vent Model 197 ENP VENT. STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL

Chemical Suitability - Standard model is for tradi onal fuel without addi ves. ON REQUEST: - “SS” model (Stainless Steel) is for aggressive solvents, acids or bases. Installa on - The Vent is only for ver cal installa on at the end of vapor pipeline. - For correct installa on follow the Direc ves and product User Manual. - For custom applica on or maintenance write to: - Declara on of Conformity and User Manual are available on: www.ridart.it/support Maintenance - Periodically check the device is necessary to remove possible dirty. - Always replace the product a er fire or deflagra on. - In case...