Catalogs >
Ridart srl >
181 ENP IN LINE FLAME ARRESTER

181 ENP IN LINE FLAME ARRESTER
2Pages

Catalog excerpts

-Line Deflagration Flame Arrester Mod. 181 EN P APPLICATION It's a Protection System with ribbon coil: deflagration in-line flame arrester in according with Directive 2014/34/EU and harmonized standard EN ISO 1 6852:201 6. - Used for hydrocarbons or chemical pipeline. - Stage I vapor recovery compliant. - The Flame Arrester avoids propagation of fire into the piping. - Surface Protection System is for all ATEX zone (0, 1 and 2). The best performances allowed by the new regulation - Max distance from the potential igniction is 50 pipe's diameter. - Max operational pressure (relative) is 0,1 bar. GAS & VAPOR COMPATIBILITY Inflammable gases and vapours classification is necessary to correct use of flame arrester. UE-Type Examination Certificate EPT 18 ATEX 3053 X is for Explosion Group “IIB3” tested with Ethylene and compatible for all gas with MESG > 0.65 mm for example: Ammonia, Industrial methane, Blas-furnace gas, Carbon monoxide, Propane, Butane, Pentane, Esane, Eptane, Iso-octane, Decane, Benzene, Xilene, Cyclohexane, Acetone, Ethyl-methyl -ketone, Methyl acetate, Ethyl acetate, Normal propyl acetate, Normal butyl acetate, Amyl acetate, Cloroethylene, Methanol, Ethanol, Iso Butanol, Normal Butanol, Amyl alcohol and Ethyl nitrite. Use only for gas or vapor with MESG > 0.65 mm. Burning rating BC=b, tBT=1 min. Max operational temperature 60°C. CHEMICAL SUITABILITY - Standard model is for traditional fuel without additives. ON REQUEST: - “PTFE” coated model is for special fuel, non-aggresive solvents or chemical products. PRODUCT CODE RIDART s.r.l. via Adua, 17 - 21045 Gazzada Schianno (VA) ITALY P.IVA/C.F. IT 01454770122 www.ridart.it info@ridart.it +39 0332 463301 Product Certification. Declaration of Conformity, User Manual and Testing on: www.ridart.it/support The Data and Images are not binding. We reserve the right to make changes without notice. Pressure & Flow Tolerances ±20%.

Open the catalog to page 1

- Always replace the product after fire or deflagration. - In case of tampering warranty expires and safety protection is not guaranteed. To choose the correct Flame Arrester, scan QRcode and fill in the form: RIDART s.r.l. via Adua, 17 - 21045 Gazzada Schianno (VA) ITALY P.IVA/C.F. IT 01454770122 www.ridart.it info@ridart.it +39 0332 463301 Product Certification, Declaration of Conformity, User Manual and Testing on: www.ridart.it/support The Data and Images are not binding. We reserve the right to make changes without notice. Pressure & Flow Tolerances ±20%.

Open the catalog to page 2

181 ENP IN LINE FLAME ARRESTER 2Pages

Catalog excerpts

All Ridart srl catalogs and technical brochures

181 ENP IN LINE FLAME ARRESTER
2Pages