1. Catalogs
  2. Ridart srl
  3. 1534/1524 EN P VAPOR RECOVERY CAMLOCK

1534/1524 EN P VAPOR RECOVERY CAMLOCK
1 /2Pages

1534/1524 EN P VAPOR RECOVERY CAMLOCK

1534/1524 EN P VAPOR RECOVERY CAMLOCK
1 /2Pages

Catalog excerpts

1534/1524 EN P VAPOR RECOVERY CAMLOCK-1

1534 EN P - 1524 EN P VAPOR RECOVERY ADAPTER In-Line Deflagra on Flame Arrester It’s a Protec on System with ribbon coil deflagra on in-line flame arrester according with Direc ve 2014/34/EU and harmonized standard EN ISO 16852:2016. - Used for hydrocarbons or chemical pipeline. - Stage I vapor recovery compliant. - The Flame Arrester avoids propaga on of fire into the piping. - Surface Protec on System is for all ATEX zone (0, 1 and 2). The best performances allowed by the new regula on - Max distance from the poten al ignic on is 50 pipe’s diameter. - Max opera onal pressure (rela ve) is 0,1 bar. Gas & Vapor compa bility Inflammable gases and vapours classifica on is necessary to correct use of flame arrester. UE-Type Examina on Cer ficate EPT 18 ATEX 3053 X is for Explosion Group “IIB3” tested with Ethylene and compa ble for all gas with MESG > 0.65 mm for example: Ammonia, Industrial methane, Blas-furnace gas, Carbon monoxide, Propane, Butane, Pentane, Esane, Eptane, Iso-octane, Decane, Benzene, Xilene, Cyclohexane, Acetone, Ethyl-methyl-ketone, Methyl acetate, Ethyl acetate, Normal propyl acetate, Normal butyl acetate, Amyl acetate, Cloroethylene, Methanol, Ethanol, Iso Butanol, Normal Butanol, Amyl alcohol and Ethyl nitrite. Use only for gas or vapor with MESG > 0.65 mm. Burning ra ng BC=b, tBT=1 min. Max opera onal temperature 60°C. MALE BODY RIBBON COIL & SUPPORT STAINLESS STEEL SCREWS, SPRING & BOLTS STAINLESS STEEL FEMALE BODY

 Open the catalog to page 1
1534/1524 EN P VAPOR RECOVERY CAMLOCK-2

PROTECTED SIDE FLOW l/min (230 mbar) Chemical Suitability - Standard model is for tradi onal fuel without addi ves. 1524 EN P Installa on - In-line flame arrester is for ver cal or horizontal installa on. - Protec on System is unidirec onal, the safety side is the FEMALE thread. - For correct installa on follow the Direc ves and product User Manual. - Explosion Group is “IIB3” in according with EN ISO 16852 (MESG > 0.65 mm). - Contact our technical department for custom applica on or maintenance by email to: [email protected]. - Product Cer fica on, Declara on of Conformity and User Manuals are...

 Open the catalog to page 2

All Ridart srl catalogs and technical brochures

  1. Ridart 6000

    3  Pages

  2. 190 VENT CAP

    2  Pages

  3. RIDART CATALOG

    39  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.