1010 EN P Ball Float Valve with In-Line Deflagra on Flame Arrester The ball float valve 1010 EN P is normally used in the vapor recovery line (Stage 2). It is designed to protect the vapor recovery line from fuel overfilling hazard during loading opera on. It’s a Protec on System with ribbon coil deflagra on in-line flame arrester according with Direc ve 2014/34/EU and harmonized standard EN ISO 16852:2016. - Used for hydrocarbons or chemical pipeline. - Stage II vapor recovery compliant. - The Flame Arrester avoids propaga on of fire into the piping. - Surface Protec on System is for all ATEX zone (0, 1 and 2). The best performances allowed by the new regula on - Max distance from the poten al ignic on is 50 pipe’s diameter. - Max opera onal pressure (rela ve) is 0,1 bar. Gas & Vapor compa bility Inflammable gases and vapours classifica on is necessary to correct use of flame arrester. UE-Type Examina on Cer ficate EPT 18 ATEX 3053 X is for Explosion Group “IIB3” tested with Ethylene and compa ble for all gas with MESG > 0.65 mm for example: Ammonia, Industrial methane, Blas-furnace gas, Carbon monoxide, Propane, Butane, Pentane, Esane, Eptane, Iso-octane, Decane, Benzene, Xilene, Cyclohexane, Acetone, Ethyl-methyl-ketone, Methyl acetate, Ethyl acetate, Normal propyl acetate, Normal butyl acetate, Amyl acetate, Cloroethylene, Methanol, Ethanol, Iso Butanol, Normal Butanol, Amyl alcohol and Ethyl nitrite. Use only for gas or vapor with MESG > 0.65 mm. Burning ra ng BC=b, tBT=1 min. Max opera onal temperature 60°C. Chemical Suitability - Standard model is for tradi onal fuel without addi ves. ON REQUEST: - “PTFE” coated model is for special fuel, non-aggresive solvents or chemical products.

ALUMINIUM + PTFE COATING BRASS + PTFE COATING RIBBON COIL STAINLESS STEEL STAINLESS STEEL PROTECTED SIDE FLOATING SIDE FLOATING SIDE AIR FLOW 2” PIPELINE (50 mbar) BSPP THREAD Installa on - The float valve must be installed in ver cal posi on on the manhole lid. - The valve allows the vapor to go in both direc ons and the liquid in one direc on only. The ball float has in fact the func on to close the vapor line in the event of tank overfilling. - Protec on System is unidirec onal, the safety side is the floa ng side. - For correct installa on follow the Direc ves and product User Manual. - For the...