LINED MAG-DRIVE ASME B73.3 PUMPS Corrosive, solids laden and high-purity fluids Performance to 1320 GPM and 500 ft. TDH Dry-Run Protection Superior Solids Handling Temperatures to 300°F (150°C) Balanced Operation Under Critical Load Conditions Quality, FDA Approved Pure PFA/PTFE Lining BUILT & SERVICED

• High chemical and permeation resistance • Temperatures to 300°F (150°C) • Full FDA conformity • Vacuum-proof anchored SAFEGLIDE® PLUS technology protects against dry-run • Utilizing proprietary surface impregnation, SAFEGLIDE® PLUS silicon carbide (SSiC) sleeve bearings are extremely wear and chemical resistant Axially thrust-optimized rotating unit – runs smoothly under critical load conditions • Well-balanced rotating unit supported both in the containment shell and in the suction-side SSiC spider • Designed for no shaft deflection, for less stress on components • Wide space between SSiC...

CHLORINATED SOLVENTS vessel loading + unloading BASE CHEMICALS ROAD + RAIL TRANSPORTATION PHOSPHORIC ACID ANOLYTE pulp bleaching UHP water metal recycling HYDROFLUORIC ACID NITRIC ACID CONCENTRATION + PURIFICATION PROCESSES MINING CATHOLYTE MONOCHLOROACETIC FINE + SPECIALTY ch e m i cal w as te w ate r CHEMICALS hydrobromic acid acetic ACID PRODUCTION AND RECOVERY acid oleum Complex processes, together with growing demands on plant flexibility and safety, require the use of highly advanced and universally resistant plant components. CHLOR-ALKALI ELECTROLYSIS CAUSTIC SODA brine ACTIVE PHARMACEUTICAL...

Performance Richter magnetic drive pumps RMA and RMA-B are available for a performance range of up to 1320 US gpm (300 m3/h) and up to 500 ft (155 m) LC at 60 Hz speeds, 1100 US gpm (250 m3/h) and up to 360 ft (110 m) LC at 50 Hz speeds. Flow rates and delivery heads outside this performance range can be covered by the Richter magnetic drive pump series MNK/MNKA up to 2650 US gpm(600 mi/h). With its design, the go od hydraul ics,the containment shell free of eddy currents and the overall monetary value, the RMA/RMA-B series is one of the most economic pumps of its kind. The 9 well graduated pump...

Richter RMA, RMA-B Pumps DIMENSIONALLY INTERCHANGEABLE WITH ASME B73.3 PUMPS Dry-Run Protection Superior Solids Handling Temperatures to 300°F (150°C) Quality, FDA Approved Pure PFA/PTFE Lining Save money and maintain reliability WITHOUT CHANGING YOUR ENTIRE SYSTEM Richter Pumps and Valves Inc. A Unit of IDEX Corporation 406 State Street Cedar Falls, IA 50613 USA Phone (319) 268-8038 | Fax (803) 216-7702 Headquarters: Richter Chemie-Technik GmbH Otto-Schott-Str. 2, D-47906 Kempen, Germany Tel. +49(0)2152/146-0 | Fax +49(0)2152/146-190 Publication No. 683us 04.16 © Richter Chemie-Technik GmbH....