IMMERSION HEATERS GAS AND BSP
1 /13Pages

IMMERSION HEATERS GAS AND BSP

IMMERSION HEATERS GAS AND BSP
1 /13Pages

Catalog excerpts

IMMERSION HEATERS GAS AND BSP-1

Zoppas Industries Heating Element Technologies

 Open the catalog to page 1
IMMERSION HEATERS GAS AND BSP-2

Zoppas Industries Heating Element Technologies Screw plug tubular heaters M77x200 Screw plug tubular heaters 1"1/2 pag. 05 - 08 Screw plug tubular heaters 1 "1/4 pag. 09 - 10 Screw plug tubular heaters 2"1/2 Immersion Heater G IV2" 400 V 3PE, isolated Tubular heaters with housing and thermostat pag. 13

 Open the catalog to page 2
IMMERSION HEATERS GAS AND BSP-3

SCREW PLUG TUBULAR HEATERS 1”1/2 Screw plug tubular heaters M77x200 with thermowell Screw-in tubular heaters with threaded plug for heating liquids. Power range: from 1000 W to 6000 W. Standard applications include the heating of recycled water for sanitary services, chlorinated water, demineralized water, fuel oil, mineral oil on the basis of the specific load. Pipes are made of the following materials: AISI 32, INCOLOY-800, INCOLOY-825, MILD STEEL, PICKLED COPPER. Plugs are made of brass. These are equipped with a high temperature-resistant gasket and with pre-wired connections (triangle or...

 Open the catalog to page 3
IMMERSION HEATERS GAS AND BSP-4

Screw plug tubular heaters 1”1/2 Screw plug tubular heaters 1”1/2 • Pins AISI 321 ø 10 • 3 Ph • Brazed pin on plug • Brass plug 1”½ • Ideal for heating fuel and mineral oils Item no. Specific load (W/cm²) • Incoloy-800 pins ø 8.5 • 3 Ph • Brazed pin on plug • Brass plug 1”½ • Ideal for water heating Specific load (W/cm²) Specific load (W/cm²) 1TTL1X343002 • Pickled copper pins ø 8.5 • 3 Ph • Brazed pin on plug • Brass plug 1”½ • Ideal for water heating • Incoloy-800 pins ø 10 • 3 Ph • Brazed pin on plug • Brass plug 1”½ • Ideal for heating soft water, recycled water and water solutions Item no....

 Open the catalog to page 4
IMMERSION HEATERS GAS AND BSP-5

SCREW PLUG TUBULAR HEATERS 1”1/4 Screw plug tubular heaters 1”1/2 with thermowell NC Screw-in tubular heaters are electro-thermal sets equipped with threaded plugs to heat up liquids. Power applications range from 750 W to 3000 W. Standard applications include : recycled water heating for sanitary purposes depending on the specific load. Pipes are made of the following materials: INCOLOY-800; Plugs are made of BRASS. These are equipped with a high temperature-resistant gasket and with pre-wired connections (triangle or star type), as well as with electrical connection on threaded rod M4. Diameter...

 Open the catalog to page 5
IMMERSION HEATERS GAS AND BSP-6

SCREW PLUG TUBULAR HEATERS 2”1/2 Screw plug tubular heaters 1”1/4 NC Screw-in tubular heaters are electro-thermal sets equipped with threaded plugs to heat up liquids. Power applications range from 3000 W to 36000 W. Standard applications include : recycled water heating for sanitary purposes, chlorinated water depending on the specific load. Pipes are made of the following materials: INCOLOY-800, NICKEL-PLATED COPPER. Plugs are made of brass. These are equipped with a high temperature-resistant gasket and with pre-wired connections (triangle or star type). Electrical connection on threaded rod...

 Open the catalog to page 6
IMMERSION HEATERS GAS AND BSP-7

TUBULAR HEATERS WITH HOUSING AND THERMOSTAT Screw plug tubular heaters 2”1/2 NC • Incoloy-800 pins ø 16 • 3 Ph • Brazed pin on plug • Brass plug 2”½ • Ideal for heating soft water, recycled water and water solutions Item no. Specific load (W/cm²) • Incoloy-800 pins ø 8.5 • Fully equipped with connection housing made of aluminium (red painted); protection level IP55 • Manual reset safety thermostat at 98°C with thermowell (thermostat setting range from 30° to 120°C) • 230 V single phase • Brazed elements on plug • Brass plug M45x2 • Ideal for water heating Specific load (W/cm²) • Nickel-plated...

 Open the catalog to page 7
IMMERSION HEATERS GAS AND BSP-8

Individually packed in cartons, gasket included Individually packed in cartons, gasket included Immersion Heater G 1½” 400 V 3PE, isolated Data Sheet: Data Sheet: Threaded head: Connection box: Sheet material: Thermostate: Electrical connection: Degree of protection: Brass Plastic protective cap (Ø88x130mm), cable gland M24 Ø8,5mm. 2.4858/incoloy 825 Regulator 30-75°C Safety thermostate switch off 98°C Threaded head: Connection box: Sheet material: Thermostate: Electrical connection: Degree of protection: Brass Stainless steel (Ø88x130mm), cable gland PG16 Ø8,5mm. 1.4404/AISI 316L Safety thermostate...

 Open the catalog to page 8
IMMERSION HEATERS GAS AND BSP-9

Individually packed in cartons, gasket included Individually packed in cartons, gasket included Data Sheet: Data Sheet: Threaded head: Connection box: Sheet material: Thermostate: Electrical connection: Degree of protection: Brass Stainless steel (Ø132x140mm), cable gland PG16 Ø8,5mm. 1.4404/AISI 316L Regulator 38-80°C Safety thermostate switch off 99°C Terminal screws IP 65 Threaded head: Connection box: Sheet material: Thermostate: Electrical connection: Degree of protection: Power [Watt] Length from sealing Unheated Length from sealing Power [Watt] Length from sealing Unheated Length from...

 Open the catalog to page 9
IMMERSION HEATERS GAS AND BSP-10

Individually packed in cartons, gasket included Individually packed in cartons, gasket included Data Sheet: Data Sheet: Threaded head: Connection box: Sheet material: Thermostate: Electrical connection: Degree of protection: Stainless steel Plastic protective cap (Ø88x130mm), cable gland M24 Ø6,5mm. 2.4858/incoloy 825 Safety thermostate switch off 98°C Terminal screw IP 44 Threaded head: Connection box: Sheet material: Thermostate: Electrical connection: Degree of protection: Stainless steel Ø6,5mm. 2.4858/incoloy 825 flat connector 6,3 mm. IP 00 Power [Watt] Length from sealing Unheated Length...

 Open the catalog to page 10
IMMERSION HEATERS GAS AND BSP-11

Individually packed in cartons, gasket included Data Sheet: Threaded head: Connection box: Sheet material: Thermostate: Electrical connection: Degree of protection: Stainless steel Ø6,5mm. 2.4858/incoloy 825 flat connector 6,3 mm. IP 00 Power [Watt] Length from sealing Unheated Length from sealing

 Open the catalog to page 11
IMMERSION HEATERS GAS AND BSP-12

Worldwide Local Supplier ZOPPAS INDUSTRIES Partner • Experience Zoppas Industries increasing efficiency using lean enterprise across all facilities and departments. Manufacturing facilities • Access our state-of-the-art laboratory facilities with over 30 years’ design experience. • Benefit from Zoppas Industries manufacturing and design facilities which maintain Quality Management Systems according to ISO 9001, EN 9100 and Environmental Management System according to ISO 14001. • Access one of the widest Heating Element Technology product portfolios in the world including completely integrated...

 Open the catalog to page 12

Archived catalogs

  1. Rica eng

    20  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.