electronic control

electronic control

electronic control

Product catalog summary
Overview: The document provides technical specifications and features of various heating solutions, including towel rail heaters, cartridge heaters, polyester heaters, alu foil heaters, radiant panels, and aluminium heating elements. It outlines the insulation classes, electronic features, and specific power details for each type of heater.
Towel Rail Heater:
  • Cartridge heaters available in Insulation Class I and Class II.
  • Electronics include a 2-hour timer, P+I regulation, maximum power of 2000 W, and relay + triac output.
  • Features fast connection, IP44, IK09, ABS PC V0, and modern design.
  • Class II includes Fil Pilote with 6 levels and NF Performance category C.
Polyester Heater:
  • Maximum working temperature of 100°C.
  • Specific power of 0.15 W/cm².
  • Typical power range between 300 and 600 W.
Alu Foil Heater:
  • Double foil with a maximum working temperature of 103°C.
  • Maximum specific power of 50 W/m.
  • Adhesive backing available on demand.
Radiant Panel:
  • Cartridge heaters with Insulation Class II.
  • Features include Fil Pilote with 6 levels, NF Performance category C, and P+I regulation.
  • Temperature setting ranges from 7° to 30°C with various mode settings.
  • Maximum power of 2000 W and triac output only.
All-in-One Ready-to-Install Solution:
  • Includes heater, sensors, control, and safety breaker.
  • Aluminium die-cast heater with Teflon surfaces.
  • Power supply options: 230V 50Hz 10% or 115V 60Hz.
  • Insulation Heater Class I and Control Class II.
  • Heating power of 1500 W with triac 16A output.
  • Features optoinsulated inputs, proportional regulation, and a user panel with low voltage IP55.
Aluminium Heating Element:
  • Composed of two resistive coils with different wattages.
  • Finned design for optimal heat transfer.
  • Maximum allowed temperature of 350°C and VDE approved.
  • Available with connectors or connecting leads and integrated cut-out.
  • Special designs available on request, with single and double power options.
See more

Catalog excerpts

electronic control-1

primo A4 28-02-2003 12:40 Pagina 1 TOWEL RAIL HEATER CARTRIDGE HEATERS: Insulation Class I and Class II ELECTRONICS: General: - Timer 2 hours - Regulation: P+I - Maximum power: 2000 W - Output: relay + triac - Fast connection - IP44 - IK09 - ABS PC V0 - Modern design - Custom-made For Class II only: - Fil Pilote with 6 Levels - NF Performance cat. C

 Open the catalog to page 1
electronic control-2

primo A4 28-02-2003 12:40 Pagina 2 RADIANT PANEL POLYESTER HEATER: -Max working temperature: 100° C -Specific power: 0,15 W/cm2 -Typical power range: between 300 and 600 W ALU FOIL HEATER: -double foil -max working temperature: 103°C -max specific power: 50 W/m -adhesive backing on demand

 Open the catalog to page 2
electronic control-3

primo A4 28-02-2003 12:40 Pagina 3 RADIATOR CARTRIDGE HEATERS: Insulation Class II ELECTRONICS: - Fil Pilote with 6 Levels - NF Performance cat. C - Regulation: P+I - Temperature setting (7° to 30°C) - Mode setting (Auto - Off - Comfort Reduction - Antifreeze) - Maximum power: 2000 W - Output: only triac - IP44 - IK09 - ABS PC V0 - Modern design - Custom-made

 Open the catalog to page 3
electronic control-4

primo A4 28-02-2003 12:40 Pagina 4 WHIRPOOL B ATHS ALL-IN-ONE READY-TO-INSTALL SOLUTION WITH HEATER, SENSORS, CONTROL AND SAFETY BREAKER: -Aluminium die-cast heater with teflon surfaces -Power supply: 230V 50Hz 10% op 115V 60Hz -Insulation Heater Class I -Insulation Control Class II -Heating power: 1500 W -Output Heater: triac 16A -Output pomp: relè 10A /1/4 Hp -Optoinsulated inputs -Regulation: proportional -Time base: 30 s -Temperature setting: 2 digits (20°-40°C) -Temperature resolution: 0,1°C -User panel: low voltage IP55 -Custom-made

 Open the catalog to page 4
electronic control-5

primo A4 28-02-2003 12:40 Pagina 5 WALL CONVECTOR ALUMINIUM HEATING ELEMENT - The element is made of two resistive coils with different wattage - Suitable finned design and different shapes to ensure the correct heating transfer - Max. allowed temperature 350°C - VDE approved - Available with connectors or connecting leads - Available with integrated cut-out - According to the shape the max & minimum linear W/cm applied in free air are from 15 to 34 W - Special design on request - Available in single and double power - Heating element has been studied especially to reach partial use of the total...

 Open the catalog to page 5

Archived catalogs

  1. Rica eng

    20  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.