Introduction
The ATLAS Series industrial vacuum cleaners by RIBO are designed for reliability and performance, suitable for various industrial applications since 1968. These machines are built with reinforced gasket casings and full steel-execution suction inlets to ensure durability and prevent air infiltration.

Specifications
The ATLAS Series includes models such as ATLAS2/P, ATLAS2/L, ATLAS4/P, and ATLAS4/L, each with different configurations for handling powders, dry solids, liquids, and shavings. Key specifications include:

• Power: 2.2 kW to 4 kW
• Voltage: 230/400 V
• Frequency: 50/60 Hz
• Waterlift capacity: 3100 mm/H2O to 3450 mm/H2O
• Airflow: 320 m3/h to 340 m3/h
• Noise level: 70 dB(A) to 73 dB(A)
• Dimensions: 570x1000x1405 mm

All models can be constructed with stainless steel for enhanced durability.

Features
The vacuum cleaners are equipped with:

• Bearing-mounted wheels for easy movement on rough surfaces.
• A container release system with reinforced steel-execution plate and lever for secure coupling.
• A built-in full-leaf cyclone separator for safe vacuuming of liquids and shavings.
• An extractable floating device for precise liquid vacuuming.
• An internal flow-deflecting baffle for wet and dry use.
• A BIA “M” Class antistatic polyester filter with a manual filter-shaking device.

Applications
The ATLAS Series is suitable for heavy-duty and continuous use, thanks to its three-phase induction motor. A wide range of genuine RIBO accessories is available to cater to various industrial needs.

Contact Information
For more information, RIBO S.r.l. can be contacted at:

• Tel: +39 051 780280
• Fax: +39 051 780230
• Website: www.ribo.net
• Email: [email protected]
• Address: Via dell’Artigiano, 2, 40055 Villanova (BO), Italy