SBC 5400

SBC 5400

SBC 5400

Product catalog summary
Overview: The SBC 5400 is a robust and scalable Session Border Controller (SBC) designed for communications service providers and large enterprises. It supports multimedia communications with features like network security, routing, policy management, and media transcoding.
System Capabilities: The SBC 5400 supports up to 75,000 simultaneous sessions, 40,000 transcoded sessions, and 32,000 H.323 sessions. It can handle a call setup rate of 700 calls per second and supports up to 600,000 registered endpoints.
Media Services: It offers extensive media services including transcoding for various codecs, NAT/NAPT on media, and support for video codecs like H.264 and VP8. It also supports up to 4 simultaneous SIPREC recordings per session.
Redundancy and Management: The system provides 1:1 redundancy for service availability and management ports. Management capabilities include a web-based GUI, Ribbon CLI, REST API, and SNMP V2/V3.
Security: The SBC 5400 includes session-aware firewall, DoS/DDoS protection, and supports encryption protocols like TLS and IPSec. It also supports STIR/SHAKEN for caller ID authentication.
Protocol Support: It supports a wide range of protocols including IPv4/IPv6, SIP, H.323, WebRTC, and more.
Routing and Policy: Features include an embedded policy/routing engine, centralized support with Ribbon PSX, and routing based on Active Directory lookup.
Certifications: The SBC 5400 is certified for Microsoft Teams Direct Routing, BroadSoft BroadWorks Platform, and complies with FIPS 140-2.
Quality of Service (QoS): It includes bandwidth management and call admission control per trunk group and zone.
Hardware Specifications: The SBC 5400 is a 2U rack-mountable device with options for AC and DC power. It includes 512 GB SSD storage and supports up to four DSP expansion slots.
Environmental and Regulatory Compliance: The device operates within a temperature range of 5 to 40ºC and complies with NEBS Level 3 standards.
About Ribbon: Ribbon Communications provides communications software and networking solutions globally, focusing on modernizing networks for improved business outcomes.
See more

Catalog excerpts

SBC 5400-1

SBC 5400 Designed for communications service providers and large enterprises, the SBC 5400 is a powerful, compact and purpose-built SBC for the multimedia communications of today and tomorrow. With the ability to scale from 2GB to 10GB of multimedia traffic, the Ribbon SBC 5400 provides all of the features you need in an SBC today—robust network security, sophisticated routing and policy management, overload controls, SIP normalization-plus the features you'll need tomorrow, such as IPv4-IPv6 interworking, multi-modal communication, built-in media transcoding, and assured performance and scale under heavy traffic. As a key component of Ribbon's award-winning SBC Core platform family, the SBC 5400 meets all of the security, scalability, availability, and management requirements of service providers and large enterprises. • RTCP sessions scale 1:1 with RTP sessions Call Set-Up • Call setup maximum rate: 700 cps • Call latency= 30ms (@ 450 cps, 90% fall into this category) Registrations • Maximum new registrations/sec: 1,250 • Total registered end point support: 600,000; up to 600,000 NAT'd end points • Maximum surrogate registrations: 256,000 Encryption • Maximum number of TLS sessions: 375,000 • IPsec (IKE) setup rate: 150/sec • Maximum # SRTP call legs: 150,000 G.722.1, AMR-NB, AMR-WB, EVRC/EVRC0, EVRCB/ EVRCB0, Opus, SILK, EVS, Linear PCM (16 bits) • Codec pass through • G.711 fallback for fax and modem calls • T.38 version 0/3 to G.711 interworking (transcoding) • VAD, Silence Suppression, Dynamic Jitter Buffer, Fax/ Modem Detection, DTMF/Tone Relay/RFC2833/RFC4733 interworking • Message Session Relay Protocol (MSRP) - MSRP B2BUA and MSRP-CEMA • DTMF Trigger Detection and Notification • Generic audio codec relay • Tones & Announcements • Local Ring Back Tone (LRBT) support with centralized PSX Policy Server • Supported video codecs: H.264 AVC, H.264 SVC, H.263+, H.261, VP8 • Support up to 4 simultaneous SIPREC recordings per session • T.140 Text over Internet Protocol (ToIP) to/from Baudot interworking for TTY/TDD (Telecommunications Device for the Deaf) equipment support Data Sheet

 Open the catalog to page 1
SBC 5400-2

• 1:1 redundant systems for service availability • 1:1 redundant management/control ports • 1:1 redundant media ports Management Capabilities • Graphical based wizards for ease of configuration • Secure embedded web-based management GUI • Centralized support by Ribbon Insight EMS • SNMP V2/V3 status and statistics • Local logging of events, alarms, traps, and call traces • Ribbon DSI Level 0 support for storing CDRs, RADIUS accounting records • Live Software Update (LSWU) • Real time streaming of RTCP statistics for Ribbon Analytics • APIs for call notification event and call termination • Back...

 Open the catalog to page 2
SBC 5400-3

Nominal 100-240 VAC Maximum 264 VAC RMS Current 5.6A Input Frequency Minimum 47 Hz Nominal 50/60 Hz Maximum 63 Hz Operating Altitude Heat Dissipation • Fully-Populated Maximum: • Replaceable Filter Weight Maximum Fully Populated • 5 to 40° C Operating -5 to 55° C Short Term • 5 to 90% Non-Condensing Operating Humidity Regulatory Compliance Central Office Standards • DC Systems - SR-3580 NEBS Level 3 • AC Systems - SR-3580 NEBS Level 3 Hardware Specifications Front Panel • Status Indicators Front Panel LEDs: - Major/Minor Alarm Rear Panel • Management Ports: Four 1GB/100Mbps Ethernet RJ-45 Ports...

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.