Catalogs >
RIB >
K400 AND S-PRO

K400 AND S-PRO
2Pages

Catalog excerpts

AVAILABLE FROM SEPTEMBER • K400 is the new RIB operator for sliding gates weighing up to 400Kg. • It will be available with magnetic or electromechanical limit switches, but also in a special version with integrated the RIB Wi-Fi system. news that brings in a single electronic card all the normal functions of management of a gate automation but above all also the wireless management of photocells, safety edges, flashing etc., obviously without having to connect any wire from the control panel to these accessories ! • In the control panel the memory of the remote control codes can be removed to facilitate the maintenance. • The control panel can also be programmed remotely via a programmer (ACG4672). • This Wi-Fi system in particular, is a world-wide FOR SLIDING GATES WEIGHING UP TO 500 kg AA40905 with magnetic limit switches and K 24V-CRX electronic control panel with electro-mech. limit switches and K 24V-CRX electronic control panel K400 Wi-Fi with magnetic limit switches and K 24V-CRX Wi-Fi electronic control panel K400 Wi-Fi with electro-mech. limit switches and K 24V-CRX Wi-Fi elec. control panel THE REMOTE CONTROL THAT CANNOT BE COPIED ! AVAILABLE FROM SEPTEMBER • 200 bits rolling code Remote Control. handle up to 800 remote controls. • RIB is the owner of the algorithm and it cannot be duplicated. • The codes in the remote controls can be inducted by using the Programmer (ACG4662). • Through the Programmer (ACG4662) the radio receiver can be installer’s loyal. • The procedures for creating a code and for cloning are identical to the standard remote controls. • The S-PRO allows you to store the codes of each installation on a SD-CARD and in your PC. • The possibility of sending a replacement remote control that can automatically disable the lost one without the need to intervene on the installation by the installer or end user. • They use dedicated radio receivers that can • Through the Programmer (ACG4662) one can remotely make the maintenance of the codes in ACG6210 S-PRO 2CH 2-channel Transmitter 433,92 MHz BATCH OF 24 PIECES ACG6224 S-PRO CLONE 4CH 4-channel Transmitter 433,92 MHz

Open the catalog to page 1

AVAILABLE FROM JUNE • The new boom arm illuminated with LED lights will soon be available for our RAPID barriers. • Thanks to a special feeder (ABP1001) it is possible to set different modes of flashing, on and off modes: 1. Lights always on 2. Lights always on and flashing 3. Lights on when the motor is activated 4. Lights on and flashing when the motor is activated 5. Lights on when the barrier is closed and still, and on and flashing when the barrier is active and the boom arm is moving. • The boom arm can carry the LED lights in the upper part, and the rubber profile ACG7090 or the...

Open the catalog to page 2