Catalogs >
RIB >
JACK

JACK
2Pages

Catalog excerpts

IRREVERSIBLE OPERATOR FOR ROLLING SHUTTERS AND AWNINGS • JACK is quiet thanks to the electric brake incorporated in the electric motor. • JACK can be installed on existing shutters and awnings without any problem. • JACK is maintenance-free. • JACK, like all RIB products is designed and made in Italy. without release system without release system without release system JACK 30 CS JACK 60 CS JACK 90 CS with release system with release system with release system Key to adjust the limit switch Octagonal drive adapter Ø 60 Octagonal drive adapter Ø 70 Ogive adapter Ø 70 Ogive adapter Ø 78 for JACK SS and JACK CS for JACK SS and JACK CS for JACK SS and JACK CS for JACK SS and JACK CS Frame support Universal support 100x100 Support with 6 holes Support and square pivot Support with threaded holes and square pivot Support and square pivot 10 mm Adjustable support with projection 40 mm for JACK SS for JACK SS for JACK SS for JACK SS for JACK SS for JACK SS for JACK SS JACK 30 SS BATCH OF 12 JACK 30 SS JACK 60 SS BATCH OF 12 JACK 60 SS JACK 90 SS BATCH OF 12 JACK 90 SS Crank with hook L = 150 cm Exagonal rod 7 mm L = 150 mm with ring Articulation 45° with grommet and exagonal rod 7 mm L = 250 mm Articulation 90° with grommet and exagonal rod 7 mm L = 400 mm Adjustable support and square pivot 10mm for override Support and square pivot Support with threaded holes and square pivot for JACK CS for JACK CS for JACK CS for JACK CS for JACK CS for JACK CS for JACK CS

Open the catalog to page 1

ACCESSORIES FOR JACK ABJ0004 J-6 control board (dead man control “open-close” or step-by-step for up to 6 JACK) With plastic container ACG2265 MINI TS control board for awnings. Connectable to anemometers, light and rain sensors With plastic container ACG2266 MINI TS SV control board for awnings. Connectable only to anemometer With plastic container ACG2276 WIND SENSOR with light sensor starting from

Open the catalog to page 2