CONTROL BOARDS FOR 1 OPERATOR AC07063 PARK 230V-CRX only pc board automatic travel and operating time learning system automatic closure pre-blinking radio command - step by step or automatic single command - step by step or automatic directional open and close commands (with timer control) stop command PARK feature to control a parking BLACK-OUT feature with automatic closure when the power supply return adjustable low speed in approaching * safety strip self-test as required by EN12453 built-in motor heater (with optional PROBE ACG4666) Control board included into barriers PARK RAPID PARK, RAPID S, RAPID N, NORMAL PARK/R2 INDUSTRIAL Connectable to photocells - safety strips - blinker - key selector * Not for PARK/R2 AC07061 PARK 24V only pc board without transformer COMPLYING • automatic travel and operating time learning system • automatic closure • continuous operation during power failure (with optional batteries and batteries recharge card) • soft start - soft stop • radio command - step by step or automatic • single command - step by step or automatic • directional open and close commands (with timer control) • stop command • PARK feature to control a parking • BLACK-OUT feature with automatic closure when the power supply return Control board supplied with barriers PRESIDENT 3 and 4 m Connectable to Safety Encoder - photocells - blinker - key selector pedestrian opening command closure command after passing through the photocells 24VAC accessories feeding strip control in opening and closing Connectable to traffic lights - box light 96 Card to add features to KS 24V and PARK 24V control boards

CONTROL BOARDS FOR 1 OPERATOR AC07093 BOSS 24V CRX only pc board without transformer COMPLYING Automatic managing of the impact sensor Radio command to turn on the courtesy light Easy release operation High speed adjustable Low speed adjustable Pre-blinking automatic closure continuous operation during power failure (with optional batteries and batteries recharge card) radio command - step by step or automatic single command - step by step or automatic built-in radio receiver 433 MHz for SUN transmitters safety strip self-test as required by EN12453 Control board supplied with BOSS MASTER 24V...