IRREVERSIBLE OPERATOR FOR UP-AND-OVER GARAGE DOOR advanced electronics, all complying with EN norms. led lighting instead of tungsten bulb: first in the world. automatic self-adjusting of the torque in every cycle, in order to allow for frictions arising during the time and reversing the travel also in case of impact during slowing down, according to Norms specifications. complying with EN12453 and EN12445 impact norms, it allows you to make an installation complying with EN13241-1 norms, without using safety strip, provided the garage door is balanced. 24V motor with selectable adjustment by a trimmer of opening and closing speed. push command step by step (open, stop, close, stop, …) on outside casing as standard feature. outside fast and convenient electronic programming and remote storing with operator already fitted and closed, by using one push button outside the casing. tubular shaft passing through the operator, for a faster, economical and welding-free installation. with battery charger group ACG4663 and batteries ACG2246 (optional), in case of black out it is possible to operate up to 50 consecutive cycles with 1 operator, and up to 27 consecutive cycles with 2 operators. • Internal gearings are made of C40 steel, aluminium and bronze, no plastic, nylon or Teflon. In addition, in order to eliminate internal gap and to get more elasticity for protecting mechanics from shocks, BOSS operator is endowed with a special internal belt (patent n. 0000267203) that makes the travel always very quiet, safe and stable. FOR UP-AND -OVER GARAGE DOORS BALANCED WITH COUNTERWEIGHTS AA40833B (with control board) (needs fixing plate) (without control board) (needs fixing plate) (with control board) (needs fixing plate) (without control board) (needs fixing plate) IP44 version also available for an extra 20 € BOSS 24V MASTER SLAVE* Opening Time Power supply Motor capacity Main line absorption 102 Daily cycles suggested Service Nr of consecutive cycles guar. Actuator weight BOSS 230V MASTER SLAVE* 800 short metal base plate 1950 long metal base plate TECHNICAL DATA * To be paired always to BOSS MASTER

ACCESSORIES FOR BOSS ACG8189 Metal base plate L = 0,8 m for automated up-and-over applications ACG8188 Metal base plate L = 1,95 m ACG8720 Pair of STRAIGHT TELESCOPIC LEVERS ACG8722 Pair of CURVED TELESCOPIC LEVERS for not automated up-and-over applications ACCESSORIES FOR CENTRAL APPLICATION ACG8710 Transmit tube L=3m for BOSS MASTER ACG8726 Transmit rod L=3m for BOSS MASTER ACG8725 Corner track block auxiliary parts for BOSS MASTER ACCESSORIES FOR LATERAL APPLICATION OF 1 BOSS MASTER+1 BOSS SLAVE ACG8715 Corner track block ACCESSORIES FOR RELEASE ACG8730 Internal cord release device ACG8734...