1. Catalogs
  2. Rhopoint Instruments
  3. M210 Milliohm Meter

M210 Milliohm Meter

M210 Milliohm Meter

M210 Milliohm Meter

Product catalog summary
Overview: The M210 Milliohm Meter, manufactured by Rhopoint Instruments in the UK, is a portable digital device designed for measuring low resistances ranging from 0.001Ω to 200Ω. It features a 5mA test current to prevent erroneous measurements due to contact cleaning, and utilizes a four-terminal input for high accuracy.
Key Features:
  • 0.1% accuracy with auto-ranging and auto-decimal point.
  • Single push-button operation with auto-power down after three minutes.
  • Long battery life powered by a single 9V battery (PP3 or MN1604).
  • Lightweight and portable design.
Specifications:
  • Ranges: 1.999Ω, 19.99Ω, 199.9Ω with increments of 0.001Ω, 0.01Ω, 0.1Ω.
  • Accuracy: +/-0.1% of range + digit.
  • Maximum Voltage: 1.4V, Maximum Current: 5mA.
  • Temperature Drift: 0.013%/°C of lowest range.
  • Display: 3 1/2 digit LCD.
  • Operating Temperature: 5°C to 35°C.
  • Weight: 510g including case and leads.
  • Dimensions: 150mm (H) x 145mm (W) x 45mm (D) in case.
Applications: Suitable for testing relay, switch, and connector contacts, PC-plated through holes, PC track resistance, transformer and motor windings, ring circuit testing, earth conductor continuity, wire-wrapped and solder joints, RFI shielding and coil resistance, network cabling, and aircraft bonding checks.
Operation: The device uses a four-terminal "Kelvin" configuration to eliminate errors from test lead length. It requires two clips for connection, with one pair of wires carrying current and the other measuring voltage. The resistance is calculated using Ohm’s law (R=E/I).
Usage Instructions:
  1. Insert black and red plugs into respective sockets.
  2. Clip leads to the circuit or component ensuring good contact.
  3. Press the ON button to read resistance.
Maintenance: Replace the battery when "LO-BAT" is displayed. Slide down the cover at the rear to replace with a new 9V battery.
Optional Accessories: Includes probe and contact connector lead set, and replacement test lead set with spring clip connectors.
Contact Information: For calibration and service, visit Rhopoint Instruments' website or contact their regional offices in the UK, Americas, or Europe.
See more

Catalog excerpts

M210 Milliohm Meter-1

M210 Milliohm Meter y 5mA Test Current y 4 Terminal Input y UKAS Calibration Certificate Manufactured by Rhopoint Instruments in the United Kingdom

 Open the catalog to page 1
M210 Milliohm Meter-2

M210 Milliohm Meter This instrument is a portable digital meter to measure low resistances over the range 0.001Ω to 200Ω. A high degree of accuracy is achieved by utilising a four terminal input to eliminate errors caused by test lead length. The instrument is small, light weight and is used easily in one hand with only an ON button to operate. It has autoranging, auto-decimal point and auto-powerdown after three minutes. It has long battery life and is powered by a single PP3 or MN1604 battery. One of the most important features of the Milliohm Meter is its low (5mA) test current. This ensures...

 Open the catalog to page 2
M210 Milliohm Meter-3

Spring clip connectors Probe and contact connector 1. Plug either black plug into either black socket in the top of the instrument and red plugs into red sockets. 2. Clip leads to circuit or component to be tested. Ensure that both faces of clip make good electrical contact. 3. Press the ON button to read resistance. 1. Insert plugs into their respective sockets as illustrated. The outer plugs form the current circuit via the clips. The inner plugs (with yellow bands) connect the probes in the voltage measuring circuit. 2. Clip leads to circuit under tester. 3. Press ON button to read resistance...

 Open the catalog to page 3
M210 Milliohm Meter-4

Specifications Instrument Details Ranges Zero Offset Maximum Voltage Maximum Current Temperature Drift Operating Temperature Weight (including case and leads) Optional Extras: M210 milliohm meter with spring clip test leads, protective case, instructions and UKAS calibration certificate. Replacement test lead set (spring clip connector) Probe and contact connector lead set. Calibration and service: Fast and economical service via our global network of accredited calibration and service centres. Please visit www.rhopointinstruments.com for detailed information. The M210 Milliohm Meter is manufactured...

 Open the catalog to page 4

All Rhopoint Instruments catalogs and technical brochures

  1. TAMS 3

    4  Pages

  2. Optimap3

    11  Pages

  3. Novo-Haze TX

    9  Pages

  4. Novo-Curve

    10  Pages

  5. MFFT

    4  Pages

  6. IQ-S

    13  Pages

  7. IQ Flex 20-S

    16  Pages

  8. IQ Flex 20

    16  Pages

  9. IQ Gloss

    15  Pages

  10. ID-Inline

    13  Pages

  11. Rhopoint ID

    16  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.