
Rhopoint IQ Flex 20-S Designed for the measurement of small and curved surfaces DOI / RIQ Meter (quantify orange peel) 20° Glossmeter Manufactured by Rhopoint Instruments in the United Kingdo
Open the catalog to page 1The Rhopoint IQ Flex 20-S quantifies surface quality problems such as orange peel and haze that are invisible to a standard glossmeter. It profiles how light is reflected from a surface. Previously only available for measuring flat surfaces, this technology is now available in a new format specifically designed for curved surfaces, as well as small and delicate parts. Flex 20-S gloss measurements are fully compatible with existing Rhopoint IQ results. The Rhopoint IQ Flex 20-S can measure: Reflected Image Quality (RIQ) Peak Specular Reflectance
Open the catalog to page 2IQ Flex 20-S Measurements The Rhopoint IQ Flex 20-S has been established as the reference instrument for measuring reflective appearance. Combined gloss, haze and DOI/RIQ values (orange peel) information has made the IQ essential for controlling appearance finish. The Rhopoint IQ Flex 20-S brings this technology to a new format specifically designed for curved surfaces, as well as small and delicate parts. Measurement of curved surfaces Conventional gloss instruments are suited to large flat test areas, as curved surfaces will cause errors. The small footprint of the IQ Flex 20-S makes it much...
Open the catalog to page 3Interchangeable adaptors Easy customisation for every application with bespoke measuring adaptors. The Rhopoint IQ Flex 20-S can be customised with magnetically attached adaptor plates to allow for the measurement of irregular surfaces. These can be easily interchanged for different applications. Small surfaces Reduced spot size Convex surface Complex curve
Open the catalog to page 4Gloss is an aspect of the visual perception of objects that is as important as colour when considering the psychological impact of products on a consumer. It has been defined as ‘The attribute of surfaces that causes them to have a shiny or lustrous, metallic appearance’. The gloss of a surface can be greatly influenced by a number of factors, for example the smoothness achieved during polishing, the amount and type of coating applied or the quality of the substrate. Gloss can also be a measure of the quality of the surface, for instance a drop in the gloss of a coated surface may indicate problems...
Open the catalog to page 5What is haze and why measure it? Haze can be described as near specular reflection. It is caused by a microscopic surface structure which slightly changes the direction of a reflected light causing a bloom adjacent to the specular (gloss) angle. The surface has less reflective contrast and a shallow milky effect. In the coatings industry, this microscopic surface texture is often due to poorly dispersed raw materials, incompatible raw materials or oxidisation and weathering. For polished metal surfaces, haze is often associated with polishing marks or chemical residue. Reflection Haze Haze is...
Open the catalog to page 6Causes of Haze Coating & Raw Materials Dispersion Pigment properties Particle size Binder compatibility Influence and migration of additives Resin types and quality Curing Drying conditions Cure temperature Post Coating Polishing marks Cleanliness Ageing and oxidisation Gloss and Haze Measurement with Array Technology The IQ Flex 20-S uses a 512 element linear diode array which profiles reflected light in a large arc from 14° to 27°. The instrument processes this high resolution data, selecting individual elements within the array that equate to the angular tolerences outlined in international...
Open the catalog to page 7Incident light Gloss and Haze component Diffused light Yellow pigment in paint film The IQ Flex 20-S compensates for reflection from within the coating for highly reflective pigments, metallic coatings and speciality pigments, allowing the haze of any painted surface to be measured. Diffuse Corrected Measurement with Array Technology* Reflection haze is caused by micro texture on a surface which causes a small amount of light to be reflected adjacent to the gloss angle. For white surfaces, bright colours and metallics, a certain amount of diffuse light, reflected from within the material, is...
Open the catalog to page 8The Rhopoint IQ Flex 20-S quantifies surface quality problems that are invisible to a standard glossmeter. Reflected Image Quality (RIQ) The Rhopoint IQ Flex 20-S measures reflected image quality; it is the only hand held instrument that profiles how light is reflected from a surface. High gloss low orange peel High gloss high orange peel RIQ is used to quantify effects such as orange peel and surface waviness. This new parameter gives higher resolution results compared to Distinctness of Image (DOI) measurement and better mimics human perception of surface texture, especially on high quality...
Open the catalog to page 9Features Designed for the measurement of small and curved surfaces. Touch control buttons Full colour easy to read screen, display can be rotated from landscape to portrait FREE EXTENDED WARRANTY Measurement button Interchangeable measuring adaptor Touch sensitive button interface Easy to control and take measurements Measuring head Easy batching Automatic measurement User definable batch names and batch sizes for quicker and more efficient reporting Single button push to initiate a defined number of measurements
Open the catalog to page 10Fast measurement of all parameters and instantly transmit measured readings. Simultaneous measurement of all parameters, date and time stamped. Statistics Displays full statistics for the number of readings in the current batch. Stored Data Graphical reporting for quick trend analysis. Pass / Fail Parameters Pass / Fail parameters can be defined for instant identification of non-conformances. ▼ MENU ACURVE ►START n = 72 Stored data View and inspect data saved on the instrument. Goniophotometric curves Different types of surface textures produce identifiably shaped reflectance profile. This goniophotometric...
Open the catalog to page 11Configuring the IQ Flex 20-S Absolute vs Comparative measurement Sample curvature naturally reflects light away from the measurement sensor. This can be compensated by using a smaller measurement spot which is less affected by the curvature. However, on highly curved surfaces, readings should be used comparatively i.e. the same spot on similar shaped samples and is therefore ideal for comparing batch to batch consistency. 4mm Reduced Spot Size Adaptor 2mm Reduced Spot Size Adaptor Curved Part Adaptor Custom 3D Printed Adaptor Flat surface Excellent Excellent Excellent Excellent N/A Large radius...
Open the catalog to page 124 Pages
11 Pages
9 Pages
9 Pages
9 Pages
10 Pages
10 Pages
4 Pages
4 Pages
13 Pages
16 Pages
15 Pages
13 Pages
16 Pages
8 Pages
2 Pages
4 Pages
13 Pages