NO MERCY FOR METAL
32Pages

CERAMICON Discs with extra bite and selfsharpening ceramic grain − for even greater productivity. > see page 04 for more X-LOCK RANGE Our specialist products for processing non-ferrous metals − with high stock removal performance without clogging. The innovative products from RHODIUS are now also available for all BOSCH Professional angle grinders with the X-LOCK system.

EXTENDED Thanks to innovative manufacturing methods, these discs start with at least 30% more performance. > see page 06 for more Xlock Technologies Fine grinding/polishing Diamond tools Fine grinding/polishing Grinding Cutting Technologies CONTENTS Diamond tools

Our discs with extra bite: XT100 EXTENDED XT100 EXTENDED X-LOCK XT200 EXTENDED RS580 EXTENDED JUMBO SPEED EXTENDED JUMBO SPEED X-LOCK JUMBO LONGLIFE FSK VISION SPEED KFK

MAXIMUM STOCK REMOVAL Thanks to ceramic abrasive grain. Our cutting discs, grinding discs and flap discs with ceramic abrasive grain and optimally matched bond and coating come with real bite and deliver greater productivity. When you need perfect work results as quickly as possible, RHODIUS CERAMICON is the only answer. The ceramic grain is self-sharpening and does not prematurely break off and cease to be effective, which significantly increases the service life. Benefits HIGHLIGHTS O High er performance - thanks to maximum stock removal performance and speed O Virtually clog-free O Saves...

XT100 EXTENDED XT200 EXTENDED RS580 EXTENDED JUMBO LONGLIFE O JUMBO SPEED EXTENDED p.19 O LSZ F EXTENDED p.20

AT LEAST 30% MORE PERFORMANCE Our innovative manufacturing methods make it possible. The ideas behind the RHODIUS innovations for more performance are both simple and challenging. It is important to get as much active abrasive grain as possible into the disc and into the smallest possible space. Special, newly developed and complex RHODIUS manufacturing methods are the key to success. The abrasive grains support each other, increasing the lifetime of the discs as a result. Benefits O Especially quiet, smooth-running and low-vibration work O Sharp from the start O Measurably more...

O XT24 O LGA ALU O KFK Find out about these products

SUITABLE FOR CONTINUOUS USE Special fillers prevent the discs from clogging. ALU discs from RHODIUS have been specially developed for machining aluminium/magnesium alloys as well as copper, bronze, brass and bearing metal. In soft metals, they achieve the required, high stock removal performance at high cutting speed on low-power machines running on battery at reduced revolutions. Benefits O No disc clogging O High stock removal, high cutting speed O Also suitable for low-power & battery-powered machines and machines with low revolutions The extra-thin cutting disc is particularly suitable...

JUMBO SPEED P p.19 VISION SPEED p.18 LGZ PB p.22 LSZ F1 p.21 LD300 p.25

And users benefit twice over. The innovative technologies from RHODIUS for even more performance when it comes to metalworking can now also be used on BOSCH Professional angle grinders with the X-LOCK system. Thanks to simple and convenient tool changing, you can now work even faster. Of course, RHODIUS discs with X-LOCK are also backwards compatible. Benefits O Fast, convenient tool change O Faster work O Backwards compatible VISION SPEED X-LOCK With a disc thickness of just 0.8mm, this is currently the thinnest cutting disc in the world with X-LOCK technology. This combination posed a...

CUTTING/ STAINLESS STEEL & STEEL S«nr XT100 EXTENDED"TOP je ••• Lifetime Cutting ability for solid material Cutting ability for thin-walled material Cutting disc with ceramic abrasive grain. For aggressive cutting performance and a long lifetime with high-volume grinding. • Cutting disc with ceramic abrasive grain • High cutting speed • Reduced burr formation Abrasive marking according to EN 12413: A36U0BF13679 Abrasive marking according to EN 12413: A36U0BF13679

XTK8 X-LOCK The 0.8 mm cutting disc with ultra low-noise operation gives you a Lifetime ••••OO precise and virtually burr-free cut. Cutting abihty for solid material••°00° Cutting ability for thin-walled material •••••• • Precise cut without requiring excessive force • Minimal burr formation means less rework • Cool cut minimises tarnish colours and material distortion Specially designed for low-power machines and battery-powered angle grinders Abrasive marking according to EN 12413: A60U9BF1433 XTK8 X-LOCK GTIN/pc. EAN/pc. 4011890124550 4011890124567 _XT38 X-LOCK proune ••o Extra-thin...

Lifetime Cutting ability for solid material Cutting ability for thin-walled material Extra-thin cutting disc with ceramic abrasive grain. For aggressive and long lasting cutting performance. • Reduced burr formation and fewer sparks • High cutting speed • For particularly hard and tough steels The mixture of RHODIUS cutting discs is tuned to processing carbon steel and delivers cost-effective cutting results. • •••OO Lifeti me Versatile cutting disc that offers a good pricerperformance ratio. •••••O Cutting ability for solid material ••••OO Cutting ability for thin-walled material• High...

XTK69 MULTI CROSS TOPline ••• Enables cutting and grinding in just one step - with a disc thickness of 1.9 mm. • Extra-thin cutting and rough grinding with a single disc • Suitable for a variety of materials • Three full-face fabric layers for extra safety 111 Ideal for low-power machines, suitable in some cases for high-fired tiles and clinker Lifetime Cutting ability for solid material Cutting ability for thin-walled material Abrasive marking according to EN 12413: 49AC46R9BF14639 XT69 MULTI CROSS GTIN/pc. EAN/pc. 4011890126257 4011890126233 disc Diamond tools Fine grinding/polishing...

• •••OO Lifeti me Extra-thin cutting disc offering a long lifetime with a broad application •••°°° Cutting abilily for solid material spectrum and an optimum price-performance ratio. •••••O Cutting ability for thin-walled material • Reduced burr formation • High cutting speed • Fewer sparks • Less edge chipping |j] I deal for low-power machines, suitable in some cases for high-fired tiles and clinker Abrasive marking according to EN 12413: 49AC46R9BF14639 Abrasive marking according to EN 12413: 49AC46R9BF14639