Catalogs >
RHODIUS >
CROSS

CROSS
2Pages

Catalog excerpts

online: www.sharpgrinding.com Noticeable advantage for the user: • Extra thin and precise cutting and rough grinding with one disc • Cutting-burr removing-chamfering slurring with one disc RHODIUS Schleifwerkzeuge GmbH & Co. KG · Brohltalstraße 2 · D-56659 Burgbrohl Tel. +49 2636 920 500 · Fax +49 2636 920 167 service@rhodius.de · www.rhodius-schleifwerkzeuge.de SafE cutting and grinding in onE oPEration • No change of machine • No interruption to work • Extremely safe through three full-surface f

Open the catalog to page 1

THE cross BY Safe cutting and grinding. „Up to now face grinding was not allowed with an abrasive cutting disc. The safety specifications for lateral resilience as set out in DIN EN 12413 were not usually met by thinner cutting disc widths. There was a risk of the discs breaking if the outer fabric was damaged. The challenge was to develop a disc that offers all the advantages of an extra-thin disc but can still be used for subsequent grinding work. The CROSS is only 1.9 mm thick and is the first extra-thin cutting disc that CAN be used for grinding!" Kerstin heiden, Rhodius-Development...

Open the catalog to page 2