RHM 60
8Pages

Coriolis Mass Flow Meter With Uncompromising Performance Standard pressure ratings up to 490 bar (7107 psi) Temperature ratings from -196 to 350°C (-320 to 662°F) Mass flow uncertainty down to 0.1% Density uncertainty down to 0.0025 kg/l Repeatability down to 0.05% Typical measuring ranges between 3000 and 60 kg/min Accurately measure low flow rates down to 45 kg/min Unique robust torsion driven oscillation system Rheonik AnyPipeFit Commitment brings you the possibility to get any custom process connection type and size for savings on installation costs. Compact design with minimal footprint Approved for use in hazardous areas Stainless steel case Rheonik Sensor Benefits • • • • • • • Specifications and features subject to change Version no: 1.2 MARCH-2021 Plant Balance Terminal Transfer Asphalt/Bitumen and other High Temperature Fluids Viscous Fluids Reactor Charging Batching Barge, Ship, Rail Car and Truck Filling Torsion oscillator design assures a stable and drift free measurement with excellent signal to noise ratios Resilient to external noise and vibration Insensitive to pipe pressure changes Robust tube wall thickness provides increased operational safety in abrasive applications Corrosion resistant Long sensor life guaranteed due to low mechanical stresses in th

General Specification Overview Nominal Flow (Qnom)* Minimum Flow (Qmin)* Operating Temperature Fluid from -196°C to 350°C (-320°F to 662°F), see options in Part Number Code Ambient from -50°C to 80°C (-58°F to 176°F), optional up to 210°C (410°F) Pressure Ratings Up to 490 bar / 7107 psi - dependent upon material Humidity Limits 5 to 95% relative humidity, non-condensing at +60°C (+140°F) Electrical Connection Cable entry M25 x 1.5 (standard), M20 x 1.5, ½” NPT, ¾” NPT (optional) Max. cable length to remote RHE transmitter 30m / 98ft Sensor Enclosure Materials Stainless steel (standard),...

Measurement Performance Standard Calibration 0.5% Uncertainty ±0.5% uncertainty between Qnom and Qmin 0.2% Uncertainty ±0.2% uncertainty between Qnom and Q0.2 Higher pressure units may have lower Qnom values due to reduced tube ID Qmin Uncertainty (%) Mass Flow Rate Q0.2 Goldline Calibration 0.1% Uncertainty ±0.1% uncertainty between QG and (QG/10) Mass Flow Rate Only for sensors with standard temperature and pressure range Customized calibration services are available – consult factory Low Flow Calibration Qlow Uncertainty (%) Low Flow Optimized Calibration ±0.2% uncertainty between...

Measurement Tube Pressure Ratings The maximum pressure (Pmax) of a sensor is determined by its lowest rated part. The lowest rated part can be either the measurement tube (Pmax indicated below) or the process connection (for Pmax see published standards or manufacturer information). Pressure Code Material Code 1.4462 (Duplex) UNS S31803 1.4410 (Super Duplex) UNS S32750 *Only with N1, NA, E2 temperature range (note Super Duplex min. temp. is -40°C) and seal-less construction type Other Materials and Pressure Ratings Higher pressure rated measurement tubes in the materials above may be...

Mechanical Construction Seal-less design PF0: parallel/dual path Process Connection 1. C2 and F3 flange selection will reduce maximum allowable measurement tube pressure rating by a factor of 0.73 Dimensions Dimensions on next page A1 Standard blue terminal box in Aluminum, size = 125 x 80 x 57 mm (4.92 x 3.15 x 2.24 in) - optionally available with integral RHE45 transmitter Optional SS 316 box, size = 100 x 100 x 61 mm (3.94 x 3.94 x 2.40 in) - only for remote transmitter NOTE: Junction boxes are supplied with M25 x 1.5 cable entries as standard. M20 x 1.5, ½” NPT, ¾” NPT cable entries are...

RHM60 Part Number Code Temperature Range N1 0 to +350°C (+32 to +662°F) Pressure Code for Pmax of Measuring Loops (see pressure ratings page) P1 pmax depends upon material pmax depends upon material pmax depends upon material Material of Wetted Parts M1 1.4571 (316Ti) (std.) M3 2.4602 (Alloy C22), seal-less construction types only XX Other materials, e.g. (Super)Duplex are available upon request Process Connection See mechanical construction pages for available connections and codes Terminal Box Selection JM Coated aluminum TB, M25 cable entry (options available) SS 316 TB, M25 cable entry...

RHM60 Part Number Option Codes Hot oil/steam heating matrix for housing, DN25 PN40 Hot oil/steam heating matrix for housing, 1'' ANSI 150 RF Hot oil/steam heating matrix for housing, 1'' ANSI 300 RF Housing purge connections - ½" NPT (2 pcs) Housing in 316 stainless steel Dye penetrant inspection X-ray test NOTE: when specifying a sensor with multiple part code options (i.e. DY and XR), separate each code with a comma in the part string (i.e. …DY,XR…) Cable Entry Options (order separately) ½" NPT Terminal Box Cable Entry M20 x 1.5 Terminal Box Cable Entry ¾" NPT Terminal Box Cable Entry...

About Rheonik Rheonik has but one single purpose: to design and manufacture the very best Coriolis meters available. Our research and engineering resources are dedicated to finding new and better ways to provide cost effective accurate mass flow solutions that provide value to our customers. Our manufacturing group care for each and every meter we produce from raw materials all the way to shipping, and our service and support group are available to help you specify, integrate, start-up and maintain every Rheonik meter you have in service. Whether you own just one meter or have hundreds, you...