RHM 06 Coriolis Mass Flow Meter for Batching/Filling and Accurate Measurement
13Pages

RHM 06 Coriolis Mass Flow Meter for Batching/Filling and Accurate Measurement Typical measuring range up to 25 kg/min Pressure ratings up to 1379 bar (20000 psi) Temperature ratings from -196 to +210 °C (-321 to +410 °F) – extended on request Mass flow uncertainty down to 0.05 % Repeatability down to 0.05 % 4 kHz measurement updates and response time of less than 1 ms when used with RHE 40 Series transmitters Accurately measures flow rates down to 100 g/min The Rheonik AnyPipeFit Commitment provides custom process connection type and size flexibility on any meter to suit your existing plant, saving time and expense on installation costs Compact design with minimal footprint Approved for use in hazardous areas 304 Stainless steel enclosure, SS316 optional Integral or remote transmitter versions available Specifications and features subject to change Version no: 1.2 | DEC 21 | General Flow Control Additive Dosing Mixing and Batching Chemical Injection Package and Container Filling Rheonik Sensor Benefits  Torsion oscillator design assures a stable and drift free measurement with excellent signal to noise ratios Resilient to external noise and vibration Insensitive to pipe pressure changes Robust tube wall thickness provides increased operational safety in abrasive applications Long life guaranteed due to low mechanical stresses in the s

General Specification Overview Nominal Flow (Qnom)* Maximum Flow (Qmax)* Typical Minimum Flow (Qmin)* Serial Tube / Single Path Flow rates will be 50% of the above listed parallel/dual path version Operating Temperature Fluid temperature range options cover from -196 °C to +210 °C (-321 °F to +410 °F) For integral transmitter versions please refer to transmitter datasheet Ambient Temperature -50 °C to +80 °C (-60 °F to +180 °F) (standard), versions available for installation in vacuum chamber (-260 °C / -430 °F) or oven (up to +210 °C / +410 °F) (optional) Pressure Ratings Up to 1379 bar /...

Measurement Performance Standard and Premium Calibration 0.20 % Uncertainty Requires RHE 16 or higher transmitter. All others 0.5 % Requires RHE 20 Series transmitter or higher Mass Flow Rate Premium Plus and Ultimate Calibration Requires RHE 20 Series transmitter or higher Qmax Qnom Requires RHE 40 Series transmitter or higher Mass Flow Rate Low Flow and Customized Calibration 0.1 % Low Flow Focused Calibration* Customized Calibration** Requires RHE 40 Series transmitter or higher Consult factory Density Calibration / Performance (Liquid) Mass Flow Rate Flow Measurement Repeatability...

Pressure Drop Every Coriolis flow sensor generates pressure drop across its inlet and outlet when in use. The amount of pressure drop generated is mainly a function of the flow velocity within its tubes and the flowing viscosity of the stream. 5 36 0 - 36 kg/min water, sensor with P1 pressure rating. Higher viscosities create higher pressure drop Mass Flow Rate (kg/min) Measurement Tube Materials and Pressure Ratings The maximum pressure (pmax) of a sensor is determined by its lowest rated part. The lowest rated part can be either the measurement tube (pmax indicated below), the connection...

Mechanical Construction Sensors are manufactured with two internal measurement tubes arranged side by side. In parallel or dual path sensors (order code Pxx), these tubes are connected in parallel and the flowing fluid is split equally between them. In serial or single path sensors (order code Sxx), the internal tubes are connected end to end, creating a single path through which all fluid flows. Manifold designs have a removable inlet/outlet manifold block and utilize selectable seals between the manifold and sensor body. In sealless designs, the measurement tubes are continuous between...

Mechanical Construction (continued) Manifold design with flange connections PM0: parallel tube / dual path Dim. L Order Code Flange ANSI 1" 300# RF/SF Flange ANSI 1" 600# RF/SF Flange ANSI 1" 1500# RF/SF Manifold design with flange connections SM0: serial tube / single path PM0 / SM0 Dimensions Weights and Shipping Dimensions: • Weight for sensor with 1” 150# flanges: ~8 kg/17.6 lb • Shipping carton size: ~50 x 50 x 50 cm (20 x 20 x 20 in) • Gross weight with RHE 28, packaging: ~14 kg/30.9 lb Dimensions are for listed products. For customization of face to face length and/or process...

Mechanical Construction (continued) Sealless design with flange connections PF0: parallel tube / dual path JM, J5 Process Connection PF0 Order Code Flange ANSI 1" 300# RF/SF Flange ANSI 1" 600# RF/SF Flange ANSI 1" 1500# RF/SF * Any remote RHE 20 or RHE 40 Series transmitter Weights and Shipping Dimensions: • Weight for sensor with 1” 150# flanges: ~7 kg/15.4 lb • Shipping carton size: ~50 x 50 x 50 cm (20 x 20 x 20 in) • Gross weight with RHE 28, packaging: ~13 kg/28.7 lb Specifications and features subject to change Version no: 1.2 | DEC 21 | Page

Mechanical Construction (continued) Sealless design with thread connections PFT: parallel tube / dual path Order Code Autoclave 9/16" MP - 13/16" - 16 UN Female Thread Swagelok® ½" Tube Inlet male (SS-810-1-12W) consult factory Swagelok® ½" O-Ring Connection male (SS-8-VCO-1) consult factory Swagelok® ½" O-Ring Connection female (SS-8-VCO-3 and -4) consult factory Swagelok® ½" with Metal Gasket female (SS-8-VCR-1 and -3) Common Dimensions for all Construction Types: • Standard blue aluminum terminal box, size = 125 x 80 x 57 mm (4.92 x 3.15 x 2.24 in) • Terminal boxes are supplied with an...

Mechanical Construction (continued) Electrical Connection Options for remote RHE20, RHE40 Transmitters JM Standard Terminal Box Coated Aluminum PM Extra Compact Terminal Box Coated Aluminum SM Terminal Box and Entire Enclosure Stainless Steel 316 TM Integral PTFE Cable instead of Terminal Box Standard Length 2 m, can be extended up to max 10 m Electrical Connection Dimensions TM Integral PTFE Cable (W) JM, SM Terminal boxes are supplied with an M20 x 1.5 cable entry, optional entries are available PM Compact Terminal boxes are supplied with an M16 x 1.5 cable entry For integral transmitter...