Safe measurement, indication and control of rotational speed

Sensor Targets In general, a coarser structure of the scanned object allows larger distances for speed detection using hall sensors. Reaching the maximum scanning frequency depends on the sensor-gear wheel configuration and the structure of the element to be scanned. General operating principle Speed sensors are used in areas where a solution for the contactless measurement of rotational speed and direction is required within inaccessible locations or under special ambient conditions at an affordable price. The exceptional operability and service life of the sensors reflects their ability to...

Simple calculation of a module For gears, the tooth geometry is given in „Modules“. The finer the tooth geometry, the smaller the value of the module. There is a simple rough calculation to determine the module. m = Module m = p / n Another possibility is the so-called involute toothing: m = Module m = d/ Z+2 k dk = Outer diameter Module = Outer diameter Z = Number of teeth Number of teeth + 2

About us RHEINTACHO Messtechnik GmbH has been engaged since 1901 in the field of rotational speed, a crucial control quantity for mechanical processes. The production range incorporates sensors, hand-held measuring devices, rotary encoders and switching devices. Just over 100 employees are employed at the company's headquarters in Freiburg. In-house product development, production and assembly departments guarantee quick and innovative solutions to customers' individual requirements. Our products are available worldwide through our subsidiaries and sales partners. With a committed and competent...